Sony SRS T33 Operating Instruction
![Sony SRS T33 manual cover](/images/3c4715b93d6872fced30c827/thumbs/thumb175x175.webp)
To pair the Sony SRS T33, turn on the speaker and press the Bluetooth button until the indicator starts flashing. Then, enable Bluetooth on your device, search for available devices, and select "SRS T33" from the list.
If your Sony SRS T33 is not turning on, ensure that the battery is charged. Connect it to a power source using the appropriate charger and wait for a few minutes before attempting to power it on again.
Yes, the Sony SRS T33 can be used while charging. Simply connect it to a power source, and you can continue to play music or use it as needed.
To reset the Sony SRS T33, turn the speaker off, then press and hold the power button and the volume down button at the same time until the indicator flashes. This will restore factory settings.
The Sony SRS T33 offers up to 12 hours of battery life on a full charge, depending on the volume level and usage conditions.
To clean the Sony SRS T33, use a soft, dry cloth to wipe the exterior. Avoid using any harsh chemicals or abrasive materials that may damage the surface.
If the sound quality is poor, ensure the speaker is within range of the Bluetooth device and that no obstructions interfere with the signal. Also, check if the speaker or device volume is set appropriately.
To update the firmware, connect the Sony SRS T33 to a computer via USB, download the latest firmware from the Sony support website, and follow the instructions provided to install it.
Yes, the Sony SRS T33 is water-resistant with an IPX4 rating, which means it can withstand splashes from any direction but should not be submerged in water.
If the Sony SRS T33 is not connecting to Bluetooth, try resetting the Bluetooth settings by pressing the Bluetooth button for several seconds until the indicator flashes rapidly. Then, try reconnecting the device.