Sony SRS RF90RK Operating Instruction

To connect the Sony SRS RF90RK headphones to your TV, first ensure the transmitter is connected to the audio output of your TV using the provided audio cable. Then, turn on both the transmitter and headphones and ensure they are set to the same channel.
First, make sure the transmitter and headphones are powered on and properly connected. Check if the volume is turned up on both the headphones and the audio source. Also, ensure the transmitter and headphones are on the same channel.
To improve sound quality, ensure that the headphones and transmitter are within the recommended range and avoid obstructions. Try changing the channel on both the transmitter and headphones to avoid interference from other devices.
Place the headphones onto the transmitter's charging cradle. Ensure the charging contacts are aligned properly. The charging indicator will light up, indicating that the headphones are charging.
The Sony SRS RF90RK headphones typically offer up to 25 hours of continuous use on a full charge. Battery life may vary depending on usage and environmental conditions.
Yes, you can connect the transmitter to multiple audio sources using an appropriate audio switcher or adapter. However, the headphones can only receive audio from one source at a time.
Use a soft, dry cloth to gently wipe the headphones and transmitter. Avoid using any chemical solvents or excessive moisture to prevent damage.
Ensure the headphones are correctly placed on the charging cradle, and that the charging contacts are clean and free of debris. If the issue persists, check the power connection of the transmitter.
To reset the headphones, turn them off, and then turn them back on. If the problem continues, remove the batteries and reinsert them after a few seconds.
Yes, replacement parts such as ear pads and batteries may be available through Sony's official service centers or authorized retailers. Check with Sony support for availability.