Sony SRS P11Q Operating Instruction

To pair your Sony SRS P11Q with a smartphone, turn on the speaker and activate Bluetooth on your phone. Search for available devices and select "SRS P11Q" from the list. Confirm pairing if prompted.
If your Sony SRS P11Q won't turn on, ensure it is charged. Connect it to a power source using the supplied USB cable. If it still doesn't turn on, try resetting the speaker by pressing the reset button found near the charging port.
To reset your Sony SRS P11Q, press and hold the reset button located near the charging port for about 5 seconds. This will restore the speaker to its factory settings.
To improve battery life, avoid exposing the Sony SRS P11Q to extreme temperatures, keep the volume at a moderate level, and ensure the speaker is fully charged before use. Turn it off when not in use.
The Sony SRS P11Q can remember multiple paired devices, but it can only be connected to one device at a time. To switch devices, disconnect the current one and connect the next.
If the sound from your Sony SRS P11Q is distorted, reduce the volume on the connected device and the speaker. Ensure the speaker is within range and there are no obstructions. Check for firmware updates.
To clean your Sony SRS P11Q, use a soft, dry cloth. Avoid using water or cleaning agents. Ensure the speaker is turned off and disconnected from any power source before cleaning.
Yes, you can use the Sony SRS P11Q while it is charging. However, this might extend the charging time. Ensure the charging cable is secure to avoid disconnections.
To check the battery level of the Sony SRS P11Q, press the 'power' button once. The indicator light will show different colors to represent the battery status: green for full, orange for medium, and red for low.
When storing the Sony SRS P11Q for an extended period, ensure it is turned off and fully charged. Store it in a cool, dry place, away from direct sunlight and extreme temperatures. Charge it every three months to maintain battery health.