Sony SRS N100 Operating Instruction

To pair your Sony SRS N100 with a Bluetooth device, first ensure the speaker is powered on. Press and hold the Bluetooth button until the indicator starts flashing. On your Bluetooth device, search for available devices and select 'SRS N100' from the list.
If your Sony SRS N100 speaker is not turning on, first check if the battery is charged by connecting it to a power source. If it still doesn’t turn on, perform a reset by pressing the reset button with a pin or a similar object.
To reset the Sony SRS N100 speaker, locate the reset button on the device. Use a pointed object to press and hold the reset button for about 3 seconds until the speaker powers off. Release the button and turn the speaker on again.
Yes, you can connect your Sony SRS N100 to a TV if the TV supports Bluetooth audio output. Follow the same Bluetooth pairing process on your TV to connect to the speaker.
To check the battery level of your Sony SRS N100, press the power button briefly. The battery indicator will flash to show the current battery level: three flashes indicate a full battery, two for medium, and one for low.
To clean your Sony SRS N100, use a soft, dry cloth to wipe the exterior. Avoid using any liquid cleaners or submerging the device in water. For persistent dirt, slightly dampen the cloth with water.
If there is no sound from your Sony SRS N100 but it is connected, check the volume level on both the speaker and the connected device. Ensure the speaker is not muted and try reconnecting the Bluetooth device.
Yes, you can use your Sony SRS N100 speaker while it is charging. Connect the speaker to a power source using the provided charging cable and continue using it normally.
To improve the Bluetooth connection range of your Sony SRS N100, ensure there are no obstructions between the speaker and the connected device. Keep them within the recommended distance and away from Wi-Fi routers or other electronic devices that may cause interference.
Yes, you can connect two Sony SRS N100 speakers together for stereo sound using the Wireless Party Chain feature. Follow the instructions in the user manual to set up the connection between the two speakers.