Sony SRS GD50iP Operating Instruction
![Sony SRS GD50iP manual cover](/images/10d67b9d1c53be6334d493c0/thumbs/thumb175x175.webp)
To connect your iPod to the Sony SRS GD50iP, simply dock the device onto the connector on the top of the speaker. Ensure the iPod is securely placed for proper connection.
If the sound is distorted, try lowering the volume on your iPod or the speaker. Check for any obstructions or dust on the docking connector and clean if necessary.
To reset the speaker, disconnect it from the power source, wait for a few minutes, and then reconnect it. This will reset the device to its default settings.
Ensure that the speaker is connected to a working power outlet. Check the docking connector for any damage or debris and make sure the iPod is properly docked.
Yes, you can connect other audio devices using the auxiliary input on the back of the speaker. Use a standard audio cable to connect your device.
Use a soft, dry cloth to gently wipe the exterior of the speaker. Avoid using any harsh chemicals or abrasive materials that may damage the surface.
The Sony SRS GD50iP does not have manual bass and treble controls. Adjust the equalizer settings on your iPod for desired sound output.
The Sony SRS GD50iP has a total power output of 20 watts.
Check the power indicator light on the speaker. If it is illuminated, the speaker is receiving power.
While the speaker can be used outdoors, it is not water-resistant. Ensure it is protected from moisture and extreme temperatures.