Sony SRS D25 Operating Instruction
![Sony SRS D25 manual cover](/images/691e84bd15afde3b194944f0/thumbs/thumb175x175.webp)
To connect your Sony SRS D25 to a computer, use the audio input cable provided with the speakers. Plug the cable into the audio output (headphone jack) of your computer and connect the other end to the audio input on the speaker.
Ensure that the power is on, the volume is turned up, and the audio cable is properly connected to both the speaker and the audio source. Check if the audio source is working by testing it with another device.
Unplug the speakers and use a soft, dry cloth to gently wipe the exterior surfaces. Avoid using any liquids or abrasive cleaners that could damage the finish.
Yes, you can connect the Sony SRS D25 to a TV using an audio cable. Plug the cable into the TV's audio output and connect it to the speaker's audio input.
Store the speakers in a cool, dry place away from direct sunlight and dust. If possible, keep them in their original packaging for added protection.
This could be due to interference from other electronic devices or a problem with the audio cable. Try moving the speakers away from other electronics and check or replace the audio cable.
The Sony SRS D25 does not have built-in controls for adjusting bass and treble. Use the equalizer settings on your audio source to make adjustments.
The Sony SRS D25 requires an AC power source. Use the power cord provided with the speakers and ensure it is plugged into a suitable wall outlet.
Ensure that the speakers are placed in a well-ventilated area and not covered by any materials. Avoid using them at maximum volume for prolonged periods.
Check the connection between the speakers and ensure the cable is securely plugged in. Test the speakers with another audio source to rule out a source-specific problem.