Sony SRS BTM8 Operating Instruction
![Sony SRS BTM8 manual cover](/images/a2c5c3d2e4bbd2280a3f5f22/thumbs/thumb175x175.webp)
To pair your Sony SRS BTM8 with a Bluetooth device, turn on the speaker and press the Bluetooth button until the indicator starts flashing. Then, go to your device's Bluetooth settings, find the SRS BTM8, and select it to pair.
If your Sony SRS BTM8 is not turning on, ensure that the batteries are correctly installed and have sufficient charge. Alternatively, connect the speaker to a power source using an AC adapter to check if it powers on.
To reset the Sony SRS BTM8, press and hold the power button while the device is on until the speaker powers off. This will reset the device, clearing any paired devices from memory.
Ensure the volume on both the speaker and the connected device is turned up. Also, check if the Bluetooth connection is active and that the device is within range.
To improve Bluetooth connection, make sure there are no obstacles like walls or electronic devices between the speaker and your Bluetooth device, and keep them within the recommended range of approximately 10 meters.
Yes, you can use the Sony SRS BTM8 while it is connected to a power source and charging.
The Sony SRS BTM8 is designed to be used with four AA alkaline batteries for optimal performance. Rechargeable batteries can also be used if preferred.
To maintain your Sony SRS BTM8, keep it clean and free from dust by wiping it with a dry, soft cloth. Avoid using chemicals or abrasive materials to prevent damage.
Bluetooth disconnections can occur if the battery is low, the devices are too far apart, or there are interferences from other electronic devices. Ensure the speaker has enough power and is within range.
To switch between devices, disconnect the current device and connect the new one via its Bluetooth settings. The SRS BTM8 will remember paired devices, allowing for easy switching.