Sony SRS A50 Operating Instruction
![Sony SRS A50 manual cover](/images/b9c1613f4021581b63fbe5ec/thumbs/thumb175x175.webp)
To pair your Sony SRS A50 with a Bluetooth device, turn on the speaker, press and hold the Bluetooth button until the indicator starts flashing rapidly, then select 'SRS A50' from the Bluetooth menu on your device.
If your Sony SRS A50 speaker is not turning on, ensure it is charged properly. Connect it to the power supply using the original charger and wait for about 10 minutes before attempting to turn it on again.
To reset your Sony SRS A50, press and hold the power button and the volume down button simultaneously for about 5 seconds until the speaker turns off.
The Sony SRS A50 has a battery life of up to 10 hours. To maximize battery life, keep the volume at moderate levels and turn off the speaker when not in use.
Yes, you can connect your Sony SRS A50 to a non-Bluetooth device using an auxiliary cable. Simply plug the cable into the AUX input on the speaker and the headphone jack of the device.
To clean your Sony SRS A50 speaker, gently wipe it with a soft, dry cloth. Avoid using solvents or abrasive cleaners that might damage the surface.
If the sound is distorted, lower the volume on both the speaker and the connected device. Check for any dirt or obstruction on the speaker grill and ensure your Bluetooth connection is stable.
Currently, the Sony SRS A50 does not support firmware updates. Ensure your device is functioning with the factory settings and proper maintenance for optimal performance.
Yes, you can use your Sony SRS A50 while it is charging. However, it is recommended to maintain a moderate volume to avoid overheating.
The Sony SRS A50 supports standard Bluetooth audio formats such as SBC (Subband Coding). Ensure your audio source is compatible with these formats for optimal sound quality.