Sony SRS A205 Operating Instruction
![Sony SRS A205 manual cover](/images/f47b52d0a4a69f15d564f0a6/thumbs/thumb175x175.webp)
Turn on the speaker, press and hold the Bluetooth button until the indicator starts flashing, and select 'SRS A205' from the Bluetooth device list on your device.
Ensure the speaker is charged. Connect it to a power source using the supplied cable and wait for at least 30 minutes before attempting to turn it on again.
To reset the speaker, press and hold the power button and the volume down button simultaneously for about 5 seconds until the indicator starts flashing.
A slight delay can occur due to Bluetooth latency. For activities requiring precise timing, consider using an auxiliary cable connection.
Connect the speaker to a computer using a USB cable, visit the Sony support website, download the latest firmware, and follow the installation instructions provided.
Use a soft, dry cloth to wipe the exterior. Avoid using any harsh chemicals or submerging the speaker in water.
Yes, the Sony SRS A205 can be used while it is charging. However, ensure that it is connected to a stable power source.
You can connect the speaker to a TV using an auxiliary cable. Plug one end into the audio output of the TV and the other into the 'AUX' input on the speaker.
Check the audio source for any issues, reduce the volume on both the speaker and the connected device, and ensure the speaker is not placed on a resonant surface.
Avoid exposing the speaker to extreme temperatures, fully charge it before use, and keep the volume at moderate levels to extend battery life.