Sony SRS 58 Operating Instruction
![Sony SRS 58 manual cover](/images/f7130652004abeec98d18298/thumbs/thumb175x175.webp)
To pair your Sony SRS-XB58 with a Bluetooth device, turn on the speaker, press and hold the Bluetooth button until the indicator flashes rapidly, then select 'SRS-XB58' from the Bluetooth menu on your device.
Ensure the charging cable is properly connected to both the speaker and a power source. Check for any damage to the cable or the charging port. If the issue persists, try using a different cable or power source.
The Sony SRS-XB58 does not support simultaneous connections to multiple devices. You need to disconnect from the current device before pairing with a new one.
To reset your Sony SRS-XB58, turn on the speaker, then press and hold the 'Power' and 'Volume Down' buttons simultaneously for about five seconds until the power indicator flashes.
The Sony SRS-XB58 offers up to 12 hours of battery life on a full charge, depending on usage and volume levels.
To update the firmware, download the 'Sony Music Center' app on your smartphone, connect it to the speaker, and follow the on-screen instructions to check for and apply any available updates.
Check if the speaker is properly paired with your device and the volume is turned up. Ensure the audio output on your device is set to the speaker, and try restarting both the speaker and your device.
Yes, you can use the Sony SRS-XB58 while it is charging. However, doing so may extend the charging time.
Use a soft, dry cloth to clean the exterior of the speaker. Avoid using water or chemical cleaners, and ensure the speaker is turned off and disconnected from any power source before cleaning.
The Sony SRS-XB58 has an IP67 rating, meaning it is dustproof and can withstand immersion in water up to 1 meter deep for 30 minutes.