Sony ILCE-6000 Instruction Manual

To reset the Sony ILCE-6000 to factory settings, go to the 'Menu', navigate to the 'Setup' tab, select 'Setting Reset', and choose 'Initialize'. Confirm the reset when prompted.
Use a blower to remove dust from the sensor. For more stubborn spots, use a sensor cleaning swab with a specific sensor cleaning solution. Always follow the manufacturer’s instructions for cleaning.
Visit the Sony support website to download the latest firmware update for the ILCE-6000. Follow the provided instructions to install the update via USB connection to your computer.
Check if the battery is properly charged and inserted. Ensure the battery compartment door is fully closed. If the issue persists, try using a different battery or charger.
Install the Sony PlayMemories Mobile app on your smartphone. Enable Wi-Fi on the camera and connect it to the app to transfer photos wirelessly.
Ensure that the lens is properly attached and clean. Check the focus mode settings in the menu. If using autofocus, switch to manual focus to see if the issue persists.
Increase the ISO sensitivity, open the aperture wider, and reduce the shutter speed. Consider using a tripod to avoid camera shake. Adjust these settings in the camera's manual mode.
The Sony ILCE-6000 does not have a microphone input, so you cannot directly connect an external microphone. Consider using an external audio recorder and syncing audio in post-processing.
Use an HDMI cable to connect the camera to the HDMI input on your TV. Ensure the camera is turned on and set to playback mode to view photos and videos on the TV screen.
Use a fast shutter speed (1/500s or higher), set the camera to continuous autofocus (AF-C), and select a continuous shooting mode to capture fast-moving subjects.