Sony NW-WS414 Instruction Manual
![Sony NW-WS414 manual cover](/images/e13d298edd2a84f4c78b9717/thumbs/thumb175x175.webp)
Use the supplied USB cable to connect the NW-WS414 to a computer or a USB power adapter. The red LED will light up indicating charging, and it will turn off when fully charged.
Ensure the device is fully charged. If it still doesn’t turn on, perform a reset by holding the power button for about 8 seconds until the LED flashes.
Rinse the device gently with fresh water and shake off excess water. Dry it with a soft cloth and ensure the earbuds are dry before storing.
The NW-WS414 supports MP3, WMA, AAC, and Linear PCM audio formats.
Connect the NW-WS414 to your computer via USB and drag and drop music files directly into the device's Music folder or use Sony's Music Center software.
Check if the audio files are in a supported format and not corrupted. Ensure the volume is up and the hold button is not activated. If issues persist, reset the device.
Press the Ambient Sound Mode button located on the side of the headset to activate or deactivate this feature.
Yes, the NW-WS414 is designed to be used in saltwater. Make sure to rinse it with fresh water after use to maintain its condition.
Connect the device to a computer, open the Walkman software, and use the reset function provided in the settings menu.
The NW-WS414 offers up to 12 hours of playback on a full charge, depending on usage conditions.