Contents

: Important safety information
- Danger of death!
- Risk of death!
- Danger of suffocation!
- Risk of electric shock!
  - Risk of electric shock!
- Risk of fire!
  - Risk of fire!
- Risk of injury!
  - Risk of injury!
  - Risk of injury!
  - Risk of injury!
General information
- Exhaust duct
  - Note
  - Electrical connection
  - : Risk of electric shock!
Installation preparation
- Checking the fitted unit
  - Appliance dimensions and safety clearances
Preparing the units
- 1. Make the cut-out in the fitted unit. (Fig. 1a)
- 2. Make the cut-out for the exhaust air pipe.
- Note
Preparing the appliance
- 1. Open the filter cover. (Fig.2a)
- Note
  - 2. Undo the hinge lock and remove the filter cover. (Fig.2b)
  - 3. Remove the metal grease filter; see the instruction manual.
  - 4. Disconnect the cabling for the control panel and the lighting. (Fig.2c)
  - 5. Undo the screws in the frame and remove the frame. (Fig.2d)
  - 6. Optional for air recirculation:
Installing the appliance
- 1. Place the appliance into the opening in the fitted unit and screw it to the fitted unit. (Fig. 3a)
- 2. Tighten the fastening screws. (Fig. 3b)
- 3. Disconnect the cabling for the control panel and the lighting.
- 4. Put the frame in place and screw it to the appliance from below. (Fig. 3c)
- 5. Secure the frame and the appliance with screws. (Fig. 3d)
- Note
  - 6. Insert the metal grease filter.
  - 7. Attach and close the filter cover.
Connecting the appliance
- Notes
- Establishing the connection for the exhaust air (Fig. 4a)
- Note
  - 1. Attach the exhaust air pipe directly to the air pipe connector.
  - 2. Connect it to the exhaust air opening.
  - 3. Seal the joints appropriately.
- Establishing the connection for the circulated air (Fig.4b )
- Notes
  - 1. Attach the exhaust air pipe directly to the air pipe connector.
  - 2. Establish the connection to the opening on the fitted unit.
  - 3. Screw the air guide grille to the fitted unit.
  - 4. Seal the joints appropriately.
- Connecting the air recirculation module (Fig.4c )
- Note
  - 1. Refer to the printed supplement for the air recirculation module.
  - 2. Attach the exhaust air pipe directly to the air pipe connector.
  - 3. Connect the pipe to the opening on the air recirculation module.
  - 4. Use suitable means to seal the joints.
  - 5. Insert the activated charcoal filter.
Removing the appliance
- 1. Disconnect the appliance from the power supply.
- 2. Disconnect the exhaust air lines.
- 3. Open the filter cover.
- 4. Remove the grease filter.
- 5. Disconnect the cabling for the control panel and the lighting.
- 6. Remove the frame.
- 7. Undo the fastening to the fitted unit.
- 8. Remove the appliance.

Siemens iQ700 LB59584M Installation Instructions

Siemens iQ700 LB59584M Hood manual cover

Pages 8

Year 0

Language(s)

of 8

Installation Instructions

8 pages

Instruction Manual

12 pages

Siemens iQ700 LB59584M Hood Specification

The Siemens iQ700 LB59584M Hood is designed to deliver a seamless blend of advanced technology and sleek aesthetics, making it an ideal addition to modern kitchens. This built-in hood is engineered for efficient air purification, ensuring a fresh kitchen environment by effectively eliminating smoke, odors, and airborne grease. It comes equipped with a high-performance motor that offers powerful extraction capabilities while maintaining a low noise level, enhancing user comfort during operation.

The hood features touch control interfaces that provide intuitive operation, enabling users to easily adjust settings to suit their cooking needs. It includes energy-efficient LED lighting, which illuminates the cooking area with a bright, clear light while consuming minimal power. The iQ700 LB59584M offers multiple power levels, providing users with the flexibility to choose the optimal extraction rate based on the intensity of their cooking activities.

Constructed with high-quality materials, the Siemens iQ700 LB59584M ensures durability and longevity. Its sleek design is characterized by clean lines and a modern finish, allowing it to complement a variety of kitchen styles. The hood also incorporates a metal grease filter that is dishwasher-safe, simplifying maintenance and ensuring consistent performance over time.

This model is designed for easy installation, fitting seamlessly into most standard kitchen cabinets. Additionally, the hood is compatible with both ducted and recirculating configurations, providing versatility in installation to suit different kitchen layouts. Overall, the Siemens iQ700 LB59584M Hood combines functionality, style, and efficiency, making it a top choice for those seeking a reliable and aesthetically pleasing kitchen ventilation solution.

Siemens iQ700 LB59584M Hood F.A.Q.

How do I install the Siemens iQ700 LB59584M Hood?

Ensure you have all the necessary components and tools. First, mount the hood on the wall using the provided brackets and screws. Then, connect it to the power supply following the wiring instructions in the manual. Make sure to secure the ductwork for proper ventilation.

What are the steps to clean the grease filters of the Siemens iQ700 LB59584M Hood?

Remove the grease filters by pulling the release handle. Wash them with warm soapy water or place them in a dishwasher. Ensure they are completely dry before reinserting them into the hood.

How can I reset the filter saturation indicator on my Siemens iQ700 Hood?

Press and hold the 'Filter Reset' button for approximately 3 seconds until the indicator light turns off. This will reset the filter saturation indicator.

What should I do if the iQ700 Hood is not extracting air properly?

Check if the filters are clean and not clogged. Ensure that the ductwork is not obstructed and there is no blockage in the air outlet. Also, verify that the hood is set to the correct extraction mode.

How do I change the light bulb in the Siemens iQ700 Hood?

Turn off the hood and disconnect it from the power supply. Carefully remove the cover of the light fixture. Replace the old bulb with a new one of the same type and wattage, then reattach the cover.

What is the maximum duct length recommended for the Siemens iQ700 Hood?

The maximum recommended duct length is 5 meters. If bends are present, reduce the length by 1 meter for each 90-degree bend to maintain optimal performance.

How can I switch between recirculation and extraction mode?

To change the mode, adjust the setting on the control panel. For recirculation mode, ensure that carbon filters are installed. For extraction mode, connect the hood to the external ducting system.

The hood is making unusual noises, what should I check?

Inspect the installation to ensure all components are securely fastened. Check if the fan or motor has any obstructions. Also, verify that the ductwork is not loose or damaged.

What are the maintenance intervals for the Siemens iQ700 Hood?

Clean the grease filters every 3 to 4 weeks depending on usage. The carbon filters should be replaced every 3 to 6 months for recirculation mode. Inspect the ductwork annually for any blockages or damage.

How do I adjust the fan speed on the Siemens iQ700 Hood?

Use the control panel to select the desired fan speed. The hood offers multiple speed settings to accommodate different cooking needs. Simply press the button corresponding to the speed level you require.