Scanstrut RL-ARM Installation Instructions

To install the Scanstrut RL-ARM Mount on a sailboat mast, first ensure the mounting surface is clean and dry. Use the included template to mark the drill holes. Drill pilot holes and use marine-grade stainless steel screws to secure the mount. Ensure the arm is oriented correctly and tighten all fasteners securely.
You will need a drill, appropriate drill bits, a screwdriver, a wrench, and a level. It's also recommended to use marine sealant around the screws to prevent water ingress.
Yes, the Scanstrut RL-ARM Mount is designed to support both radar and satellite antennas. Ensure that the weight and dimensions of your device are within the mount's specifications.
If you notice rust on your RL-ARM Mount, clean the affected area with a rust remover or a mixture of baking soda and water. Rinse thoroughly and apply a protective coating of marine-grade paint or sealant. Regular maintenance and cleaning can prevent rust from forming.
To adjust the angle of the RL-ARM Mount, loosen the adjustment bolts on the arm. Position the arm to the desired angle and then retighten the bolts securely to hold the position. Ensure that the antenna is aligned properly for optimal performance.
Regularly inspect the mount for signs of wear, corrosion, or loose fittings. Clean the mount with fresh water to remove salt and debris. Apply a light lubricant to moving parts to ensure smooth operation. Check all fasteners and retighten if necessary.
Yes, the RL-ARM Mount can be easily removed by unscrewing the mounting bolts. It is recommended to keep the bolts and any other small components in a labeled container to prevent loss. Store the mount in a dry place to avoid corrosion.
The RL-ARM Mount is designed to withstand harsh marine environments, including strong winds and saltwater exposure. However, it is important to ensure that all fasteners are secure and to conduct regular maintenance checks.
If the mount becomes loose, inspect all fasteners and tighten them as needed. If any components are damaged or corroded, replace them immediately to ensure the mount remains secure. Regularly check the mount's stability as part of routine maintenance.
The RL-ARM Mount is compatible with most marine radar and satellite antennas. However, it's important to verify that the antenna's weight and size are within the mount's specifications. Consult the mount's manual or contact the manufacturer for compatibility confirmation.