Scanstrut APT-LB-L1 Installation Instructions

Scanstrut APT-LB-L1 Light Bar manual cover

Pages 2

Year 2021

Language(s)

of 2

Scanstrut APT-LB-L1 Light Bar Specification

The Scanstrut APT-LB-L1 Light Bar is designed to offer optimal illumination and durability for marine and off-road applications. It features a robust construction, engineered to withstand challenging environments and extended exposure to the elements. The light bar is crafted from high-grade marine-grade aluminum, ensuring resistance to corrosion and mechanical impacts. Its design incorporates a sleek, low-profile aesthetic that complements various vehicle styles while minimizing wind resistance.

The APT-LB-L1 is equipped with high-intensity LED lights that deliver exceptional brightness and energy efficiency. These LEDs provide a wide beam pattern, effectively illuminating large areas for enhanced visibility and safety during nighttime operations. The light bar operates on a versatile voltage range, accommodating both 12V and 24V systems, making it suitable for a wide array of vehicles and vessels. It is designed to be easily mounted, with adjustable brackets that allow for precise positioning to achieve optimal lighting angles.

The Scanstrut APT-LB-L1 is sealed to an IP67 waterproof rating, ensuring reliable performance in wet and dusty conditions. This makes it ideal for use in marine environments where water and salt exposure are prevalent. The light bar is also vibration-tested, ensuring consistent performance on rough terrains and high-speed applications. With a focus on longevity, the LEDs have an extended lifespan, reducing the need for frequent replacements and maintenance. Overall, the Scanstrut APT-LB-L1 Light Bar is a versatile and resilient lighting solution that meets the demands of both marine and off-road enthusiasts seeking robust and reliable illumination.

Scanstrut APT-LB-L1 Light Bar F.A.Q.

What is the recommended installation process for the Scanstrut APT-LB-L1 Light Bar?

To install the Scanstrut APT-LB-L1 Light Bar, begin by selecting a suitable mounting location. Secure the light bar using the provided brackets and hardware. Connect the wiring to the vehicle's power source, ensuring correct polarity. Test the light bar to verify proper operation.

How can I troubleshoot if my Scanstrut APT-LB-L1 Light Bar does not turn on?

First, check the power connections and ensure they are secure. Verify that the fuse is intact and not blown. Test the switch to ensure it is functioning properly. If issues persist, test the light bar with a multimeter to check for electrical continuity.

What maintenance is required for the Scanstrut APT-LB-L1 Light Bar?

Regularly clean the light bar with a soft cloth and mild detergent to remove dirt and debris. Inspect the wiring and connections for any signs of wear or corrosion. Ensure that mounting brackets are tight and secure.

Can the Scanstrut APT-LB-L1 Light Bar be used in harsh weather conditions?

Yes, the Scanstrut APT-LB-L1 Light Bar is designed to be weather-resistant and can be used in a variety of outdoor conditions, including rain and snow. However, regular maintenance is recommended to ensure longevity.

What should I do if the light output of my Scanstrut APT-LB-L1 Light Bar is dimmer than expected?

Check the power supply to ensure it matches the light bar's requirements. Inspect the lens for dirt or fogging and clean if necessary. Verify that the connections are secure and free from corrosion.

Is it possible to adjust the angle of the Scanstrut APT-LB-L1 Light Bar after installation?

Yes, the light bar's mounting brackets allow for angle adjustments. Loosen the adjustment screws, set the desired angle, and then retighten the screws to secure the position.

How do I ensure the wiring of my Scanstrut APT-LB-L1 Light Bar is safe and secure?

Use heat shrink tubing or electrical tape to insulate connections. Route the wiring away from sharp edges and moving parts. Secure the wires with zip ties to prevent movement and reduce wear.

What is the best way to clean the lens of the Scanstrut APT-LB-L1 Light Bar?

Use a soft, damp cloth with mild soap to gently clean the lens. Avoid using abrasive cleaners or rough materials that might scratch the surface. Rinse with clean water and dry with a soft cloth.

How do I integrate the Scanstrut APT-LB-L1 Light Bar with an existing vehicle lighting system?

Consult the vehicle's wiring diagram to find a suitable power source. Use a relay if necessary to prevent overloading circuits. Connect the light bar's wiring according to the manufacturer's instructions and test the system for proper operation.

What should I do if I notice condensation inside the Scanstrut APT-LB-L1 Light Bar?

Check for any gaps or damage in the light bar's seals. Dry out the interior by removing the light bar and placing it in a warm, dry environment. Consider applying a moisture-resistant sealant around any visible gaps.