Scanstrut M92698 Installation Instructions
![Scanstrut M92698 Mount manual cover](/images/yUMWEUvajlBjVARLhlKCFmTE/thumbs/thumb175x175.webp)
Ensure that the mounting surface is clean and flat. Use the provided bolts and washers to secure the mount, and tighten them to the manufacturer's torque specifications.
Routinely check all bolts and fastenings for tightness. Inspect the mount for any signs of corrosion or wear, and clean with fresh water after exposure to saltwater.
Yes, it can support additional equipment, but ensure the total weight does not exceed the specified load capacity of the mount.
Clean the affected area with a rust remover, rinse thoroughly, and apply a marine-grade anti-corrosion spray to prevent further rusting.
Check that the mount is level and correctly positioned. Adjust the mounting angle if necessary, and ensure that the radar is properly aligned with the mount.
It is recommended to remove the mount and store it in a dry place during the off-season to prevent weather-related wear and tear.
A set of wrenches, a screwdriver, a drill with appropriate bits, and a torque wrench are recommended for installation.
Ensure the mount is securely fastened and properly aligned. Regularly check for any obstructions that might interfere with the radar signal.
Yes, the mount is designed for use on both powerboats and sailboats, as long as it is installed according to the guidelines provided.
Immediately tighten all bolts and fastenings to avoid damage or equipment loss. Regularly check the mount's stability to ensure safety.