Salus RT500BC Instruction Manual

To reset your Salus RT500BC thermostat, press and hold the reset button located on the back of the device for about 5 seconds until the screen turns off and then back on. This will restore the factory settings.
Ensure that the thermostat is properly connected and that the batteries are not depleted. Replace the batteries if necessary. If the issue persists, try resetting the thermostat and reprogramming your settings.
To program the schedule, press the 'Program' button. Use the arrow keys to set the time and temperature for each period. Confirm each setting with the 'OK' button. You can set different schedules for weekdays and weekends.
Error codes can indicate various issues such as connectivity problems or hardware faults. Refer to the user manual for the specific error code meaning and follow the troubleshooting steps provided.
To change the batteries, remove the thermostat from its wall mount by gently pulling it. Open the battery compartment on the back and replace the old batteries with new AA alkaline batteries, ensuring correct polarity.
The Salus RT500BC does not support smartphone connectivity. Consider upgrading to a smart thermostat model if you require this functionality.
The typical wireless range of the Salus RT500BC thermostat is approximately 30 meters in an open area. Walls and other obstacles may reduce this range.
To lock the keypad, press and hold the 'OK' button for 10 seconds. To unlock, repeat the same process. This prevents unauthorized changes to the settings.
Program a heating schedule that aligns with your daily routine, ensuring the heating is reduced when you are not home. Regularly check for updates in the manual to optimize settings for energy savings.
First, check and replace the batteries if necessary. If the display remains blank, ensure the thermostat is properly mounted and the connections are secure. A reset may also help restore functionality.