Realflame C1725 Owner's Manual
![Realflame C1725 manual cover](/images/7b180b391993ae9aac39463d/thumbs/thumb175x175.webp)
To turn on your Realflame C1725, locate the power switch on the side or back of the unit and flip it to the "On" position. Then, use the remote control or the control panel to select your desired heat and flame settings.
Ensure the thermostat is set higher than the room temperature. Check if the air intake is blocked, and clean the filter if necessary. If the issue persists, consult the troubleshooting section of the user manual.
Turn off and unplug the unit. Allow it to cool completely. Use a soft cloth with a mild glass cleaner to wipe down the glass. Avoid abrasive materials that might scratch the surface.
Regularly clean the exterior with a soft, damp cloth. Check and clean the air intake and filter periodically. Ensure all electrical connections are secure and inspect the power cord for any signs of wear.
Use the remote control or the control panel to cycle through the flame brightness settings until you reach your desired level of brightness.
Yes, the Realflame C1725 has a flame-only setting that allows you to enjoy the ambiance of a fire without the heat. Simply select the flame setting without activating the heater.
Unusual noises may be caused by loose components or debris in the fan. Turn off the unit, unplug it, and inspect the interior for any loose parts or obstructions. If necessary, contact customer support for assistance.
To reset the unit, turn it off and unplug it from the outlet. Wait for about 5 minutes before plugging it back in and turning it on. This can help resolve minor operational issues.
First, check the batteries and replace them if needed. Ensure there are no obstructions between the remote and the sensor on the fireplace. If the problem persists, try resetting the remote or consult the manual.
While the Realflame C1725 is designed with safety features, it is advisable to turn off the unit when unattended for extended periods, including overnight, to ensure maximum safety and energy efficiency.