Realflame 592LP Owner's Manual
![Realflame 592LP manual cover](/images/7021eb687929b3d8dc8a0a44/thumbs/thumb175x175.webp)
To set up the Realflame 592LP, ensure the unit is placed on a stable, level surface. Connect the propane tank securely and check for leaks using a soapy water solution around the connections. Follow the instructions in the manual to ignite the unit safely.
If the 592LP does not ignite, check the propane tank to ensure it is not empty. Verify that the gas valve is open and inspect the connections for leaks. If the issue persists, consult the troubleshooting section of the manual or contact customer support.
Regularly clean the burner and control area to avoid blockages. Inspect the unit for signs of wear or damage. Store the unit in a dry place when not in use to prevent rust and corrosion.
Ensure the gas supply is turned off and disconnect the propane tank. Clean the unit and cover it to protect from dust and moisture. Store it in a dry, well-ventilated area.
No, the Realflame 592LP is designed for outdoor use only. Using it indoors can be hazardous due to carbon monoxide buildup and increased fire risk.
Turn off the unit and let it cool completely. Use a soft brush or cloth to remove debris from the exterior. For the burner area, gently brush away any dust or residue. Avoid using harsh chemicals that could damage the finish.
Immediately turn off the gas supply and extinguish any flames. Check all connections for leaks using a soapy water solution. If the smell persists, do not use the unit and contact a professional for inspection.
No, never leave the Realflame 592LP unattended while it is operating. Always ensure someone is monitoring the unit to quickly address any issues that may arise.
Regular maintenance, proper storage, and careful handling will extend the life of your Realflame 592LP. Avoid exposing it to harsh weather conditions and keep it clean and dry when not in use.
During regular inspections, check for gas leaks, inspect hoses and connections for wear, ensure the burner is clean, and verify that all components are functioning correctly.