Realflame C11812LP Owner's Manual
![Realflame C11812LP manual cover](/images/8a993fc47227c5c877132f36/thumbs/thumb175x175.webp)
To ignite the Realflame C11812LP, ensure the gas supply is connected and turned on. Open the control panel, turn the gas control knob to the 'pilot' position and press the igniter button until the pilot lights. Hold the knob in for about 30 seconds, then release it and turn it to your desired flame setting.
If the pilot light won't stay lit, check for obstructions in the pilot tube and clean if necessary. Ensure the thermocouple is in position and functioning. If issues persist, consult the manual for troubleshooting or contact a professional technician.
Before cleaning the burner, ensure the gas is turned off and the unit is cool. Remove the burner assembly and gently brush away any debris. Use a vacuum to remove dust and dirt. Reassemble the burner, ensuring all components are securely in place.
A yellow flame can indicate incomplete combustion. Check for blockages in the burner ports and ensure the gas pressure is adequate. Clean the burner if necessary and consult the user manual for further guidance.
Regular maintenance includes cleaning the burner, checking for leaks, inspecting the gas lines, and ensuring the flame is burning correctly. Periodically check the thermocouple and pilot assembly. Follow the manufacturer's recommended maintenance schedule for optimal performance.
Conversion from propane to natural gas should only be performed by a qualified technician. A conversion kit may be required, and it is essential to follow the manufacturer's instructions to ensure safety and performance.
If you smell gas, turn off the gas supply immediately and extinguish any open flames. Do not operate any electrical switches. Ventilate the area and contact a professional technician to inspect and repair any leaks.
When storing the Realflame C11812LP, ensure the gas supply is turned off and disconnect the propane tank. Clean the unit and store it in a cool, dry place. Use a protective cover to prevent dust and debris accumulation.
The Realflame C11812LP is designed for outdoor use only. Using it indoors can lead to carbon monoxide buildup and pose serious safety risks. Always ensure proper ventilation when operating the unit.
If the unit is not heating properly, check if the gas supply is adequate and the burner is clean. Ensure the control knob is set to the desired heat level. If the problem persists, consult the manual or contact a professional technician for assistance.