Panasonic AW-HR140PJ v2 Operating Instructions

Pages 56

Year 2017

Language(s)

of 56

Operating Instructions

124 pages

Operating Instructions

56 pages

Page 1

Model No. AW-HR140PJ Model No. AW-HR140EJ

Operating Instructions Excerpted Version

Installation Instructions provided

HD Integrated Camera

Before operating this product, please read the instructions carefully and save this manual for future use.

DVQX1270ZA SS0417TY0 -FJ Printed in Japan

ENGLISH

ENGLISH Excerpted Version

Before using this product, be sure to read Read this first! (pages 4, 18, 19). This manual contains information excerpted from the Operating Instructions and the Installation Instructions. For more information, please visit the Panasonic website (http://pro-av.panasonic.net/en/manual/index.html), and refer to the Operating Instruction (PDF).

FRANAIS Avant dutiliser cet appareil, assurez-vous de lire la section Lire ces informations en premier ! (pages 4, 20, 21). Pour de plus amples informations, visiter le site Web de Panasonic (http://pro-av.panasonic.net/en/manual/index. html) et consulter le mode demploi (PDF).

ESPAOL Antes de usar este producto, asegrese de leer Lea este documento en primer lugar! (pginas 4, 22, 23). Si desea obtener ms informacin, visite el sitio web de Panasonic (http://pro-av.panasonic.net/en/manual/index. html) y consulte las instrucciones de funcionamiento (PDF).

DEUTSCH Bitte lesen Sie sorgfltig die Bitte lesen Sie zuerst diesen Hinweis! vor der Nutzung dieses Produkts. (Seiten 5, 24). Weitere Informationen finden Sie auf der Panasonic-Webseite (http://pro-av.panasonic.net/en/manual/index.html) und in der Bedienungsanleitung (PDF).

ITALIANO Prima di utilizzare il prodotto, assicurarsi di leggere Leggere prima quanto segue! (pagine 5, 25). Per maggiori informazioni, per favore visitare il sito web Panasonic (http://pro-av.panasonic.net/en/manual/index. html), e fare riferimento alle istruzioni per luso (PDF).

! (. 5, 26). - Panasonic (http://pro-av.panasonic.net/en/ manual/index.html), (PDF).

Page 2

Trademarks and registered trademarks Microsoft, Windows, Windows 7, Windows 8, Windows 8.1,

Windows 10, Internet Explorer, ActiveX and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.

Apple, Mac, OS X, iPhone, iPod Touch, iPad, and Safari are registered trademarks of Apple Inc., in the United States and other countries.

Android is a trademark of Google Inc. Intel and Intel CoreTM are trademarks or registered trademarks

of Intel Corporation in the United States and other countries. Adobe and Reader are either registered trademarks or

trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Other names of companies and products contained in these Operating Instructions may be trademarks or registered trademarks of their respective owners.

About copyright and licence Distributing, copying, disassembling, reverse compiling, reverse engineering, and also exporting in violation of export laws of the software provided with this unit are expressly prohibited.

Abbreviations The following abbreviations are used in this manual. Microsoft Windows 7 Professional SP1 32/64-bit is abbreviated

to Windows 7. Microsoft Windows 8 Pro 32/64-bit is abbreviated to

Windows 8. Microsoft Windows 8.1 Pro 32/64-bit is abbreviated to

Windows 8.1. Microsoft Windows 10 Pro 32/64-bit is abbreviated to

Windows 10. Windows Internet Explorer 8.0, Windows Internet

Explorer 9.0, Windows Internet Explorer 10.0 and Windows Internet Explorer 11.0 are abbreviated to Internet Explorer.

For the purposes of this manual, the model numbers of the units are given as listed in the table below.

Model number of unit Model number given in manual

AW-HR140PJ AW-HR140

AW-HR140EJ AW-HS50N

AW-HS50 AW-HS50E AW-RP50N

AW-RP50 AW-RP50E

AW-RP120G AW-RP120 AK-HRP200G AK-HRP200

Illustrations and screen displays featured in the manual What is shown in the manuals illustrations and screen displays

may differ from how it is actually appears. Functions which can be used by Windows only are indicated using

the mark. The screenshots are used in accordance with the guidelines of

Microsoft Corporation.

Hrvatski Za sigurnosne informacije i vane obavijesti o proizvodu posjetite sljedeu internetsku stranicu.

etina Na nsledujcm webu najdete bezpenostn informace a dleit poznmky k tomuto produktu.

Dansk Besg flgende webside for sikkerhedsinformation og vigtige bemrkninger vedrrende produktet.

Nederlands Ga naar de volgende website voor veiligheidsinformatie en belangrijke meldingen over het product.

Eesti Toodet puudutava ohutusteabe ja oluliste mrkuste saamiseks klastage jrgmist veebilehte.

Suomi Ky seuraavalla verkkosivulla saadaksesi turvallisuustietoja ja trkeit tietoja liittyen laitteeseen.

, .

Magyar A termkkel kapcsolatos biztonsgi informcikrt s fontos rtestsekrt ltogasson el az albbi weboldalra.

Latvieu Lai iegtu informciju par drobu un skattu svargus paziojumus par o produktu, apmekljiet tlk nordto tmeka vietni.

Lietuvi Jei reikia saugos informacijos ir svarbi praneim apie gamin, apsilankykite toliau nurodytoje svetainje.

Polski Informacje o bezpieczestwie i wane informacje o produkcie znajduj si w poniszej witrynie internetowej.

Portugus Consulte o seguinte website para as informaes de segurana e importantes notificaes sobre o produto.

Romn Vizitai urmtoarea pagin web pentru informaii de securitate i notificri importante cu privire la produs.

Slovensky Pre bezpenostn informcie a dleit oznmenia svisiace s produktom navtvte tto webov strnku.

Slovenina Za varnostne informacije in pomembna obvestila v zvezi z izdelkom obiite naslednje spletno mesto.

Svenska Besk fljande webbplats fr skerhetsinformation och viktiga meddelanden om produkten.

http://pro-av.panasonic.net/en/manual/index.html

Page 3

Contents

Read this first! ....................................................................................... 4 Lire ces informations en premier!........................................................ 4 Lea esto primero! .................................................................................. 4 Bitte lesen Sie zuerst diesen Hinweis! ................................................ 5 Leggere prima quanto segue! .............................................................. 5 ! ............... 5 Installation precautions ........................................................................ 6 Before installation ................................................................................. 8

MODE switch settings .......................................................................... 8

How to install and connect the unit ..................................................... 8 Performing the installation surface work .............................................. 8 Mounting the camera to the installation surface .................................. 8 Example of attaching the washer nozzle ............................................. 9 Fixing the drop-prevention wire............................................................ 9 Attaching the cable cover................................................................... 10 Suspended installation ....................................................................... 10 Changing the rotation range (suspended installation) ....................... 10

Connections ......................................................................................... 12 Connections with an HD monitor ....................................................... 12 Connections with a controller

(AW-RP50/AW-RP120/AK-HRP200) ............................................. 12 System example 1 (Serial control) ..................................................... 13 System example 2 (IP control) ........................................................... 14 System example 3 (IP image transmission, PoE++).......................... 15 System example 4

(connection with commercially available controller) ....................... 16 System example 5

(optical fiber system/audio connection using PoE++) .................... 16

Appearance .......................................................................................... 17

Read this first! (For AW-HR140PJ) .................................................... 18 Read this first! (For AW-HR140EJ) .................................................... 19 Lire ces informations en premier ! (Pour AW-HR140PJ) ................. 20 Lire ces informations en premier ! (Pour AW-HR140EJ) ................. 21 Lea esto primero! (Para AW-HR140PJ) ............................................. 22 Lea esto primero! (Para AW-HR140EJ) ............................................. 23 Bitte lesen Sie zuerst diesen Hinweis! (Fr AW-HR140EJ) ............. 24 Leggere prima quanto segue! (Per AW-HR140EJ) ........................... 25 !

( AW-HR140EJ) ......................................................................... 26 Note on grounding ............................................................................. 27

Before use ............................................................................................ 28 Overview ............................................................................................ 28 Computer requirements ..................................................................... 28 Disclaimer of warranty ....................................................................... 29 Network security ................................................................................ 29

Features................................................................................................ 30 Controller supported ........................................................................... 31 Accessories ......................................................................................... 32 Operating precautions ........................................................................ 33 Parts and their functions .................................................................... 35 AW-RP50 (not supplied) ...................................................................... 37 Network settings.................................................................................. 42

Use the Easy IP Setup Software to establish the units settings........ 42 Installing the plug-in viewer software ................................................. 43 Enable the user authentication function ............................................. 43

Troubleshooting .................................................................................. 44 Specifications ...................................................................................... 53 Index ......................................................................................Back cover

Installation Instructions

Operating Instructions

2 3

Page 4

Installation Instructions

Read this first!

WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

WARNING: Installation should only be performed by qualified installation personnel. Improper installation may result in the entire apparatus falling down and causing injury.

indicates safety information.

Lire ces informations en premier!

AVERTISSEMENT: Pour viter tout risque de blessures, lappareil doit tre solidement fix au plancher/mur conformment aux instructions dinstallation.

AVERTISSEMENT: Linstallation ne doit tre effectue que par du personnel dinstallation qualifi. Une mauvaise installation peut avoir pour consquence la chute de lappareil et provoquer des blessures.

Informations concernant la scurit.

Lea esto primero!

ADVERTENCIA: Para evitar heridas, este aparato debe estar firmemente instalado al piso/pared de acuerdo con las instrucciones de instalacin.

ADVERTENCIA: La instalacin solamente debe llevarla a cabo personal cualificado. Una instalacin incorrecta podra provocar la cada del dispositivo y causar lesiones.

indica informacin de seguridad.

ENGLISH

FRANAIS

ESPAOL

Page 5

Installation Instructions

Bitte lesen Sie zuerst diesen Hinweis!

WARNUNG: Um Verletzungen zu verhten, muss dieser Apparat gem der Installationsanleitung sicher am Boden bzw. an der Wand befestigt werden.

WARNUNG: Die Installation darf nur durch qualifiziertes Personal ausgefhrt werden. Fehlerhafte Installation kann zum Herunterfallen des Gertes und zu Verletzungen fhren.

ist die Sicherheitsinformation.

Leggere prima quanto segue!

AVVISO: Per prevenire ferite, questo apparecchio deve essere montato saldamente al pavimento/muro in conformit alle istruzioni di installazione.

AVVISO: Linstallazione deve essere realizzata unicamente da tecnici qualificati. Uninstallazione incorretta pu risultare nella caduta dellapparecchio con conseguenti danni alle persone.

sono le informazioni sulla sicurezza.

: / .

: . .

, .

Read this first

DEUTSCH

ITALIANO

4 5

Page 6

Installation Instructions

Installation precautions

Panasonic does not accept any responsibility for accident or damage during installation if procedure in this manual is not followed.

To installation personnel Read the Installation Instructions thoroughly and then perform the operation correctly and safely. Also, always read the Read this first! ( page 4) of this manual as they contain important information. After the installation, give the Installation Instructions to the customer to save for future use.

Ensure that the installation work complies with the technical standards governing electrical equipment.

This unit is a stand-alone (desktop) device that supports installation outdoors. This unit is not designed to be used in vehicles. If the unit will be subjected to extreme vibration, take measures to reduce the vibration before use.

Use the unit with an installation where the unit is suspended from an overhead surface or with a stand-alone installation. Do not use the unit on its side or tilted at an angle.

Be absolutely sure to use the supplied mounting bolts (M8) for the

unit. Do not use wood screws, nails, etc. In the case of a concrete ceiling, secure the unit using anchor bolts (for M8) or AY plug bolts (for M8). Recommended clamping torque

M8: 11.76 Nm {120 kgfcm} The withdrawal strength of the mounting location for each screw

must be at least 1764 N {180 kgf}. Do not hold the camera head while undertaking the installation work.

Doing so may cause malfunctioning.

OK NGOK NG

Desktop installation Hanging installation

Concerning the installation location Consult the dealer about the installation area and then select a strong ceiling, floor, or other area for the installation area. Mount the unit to a ceiling or floor that is strong enough (one made

of concrete). Mount the camera unit to a part of the main structure of the

building or a part that is sufficiently strong. Do not mount the unit on a plaster board or a wooden section

because they are too weak. If the unit is unavoidably mounted on such a section, the section shall be sufficiently reinforced.

Concerning waterproofing and dustproofing When installed correctly, the unit complies with IP65 waterproof and dustproof performance standards. Be sure to perform wiring and other installation procedures according to the instructions in this document.

Do not install or use the unit in the following kinds of locations. Locations where a chemical agent is used such as a swimming

pool Locations subject to moisture or oil smoke such as a kitchen Locations that have a specific environment that is subject to an

inflammable atmosphere or solvents Locations where radiation, X-ray, intense radio wave, or strong

magnetism is produced Locations where seawater will directly splash on the unit and

locations where corrosive gas is generated such as volcanic regions and spa areas

Locations where the temperature is not within the specified range ( page 53)

Locations subject to vibrations, such as on vehicles or above product lines (This unit is not designed to be used in vehicles.)

Locations subject to sudden changes in temperature, such as near the outdoor unit of an air conditioner (The inside of the front glass may steam up or condensation may form on it.)

Concerning installation in a seashore area Salt damage prevention is applied to this unit. However, it is not

completely anti-corrosive. Therefore, consider a place for installation where direct splash of seawater can be avoided.

Especially when installing this unit in a seashore area or a place where a snow-melting agent is applied, and also where rainwater is avoided, it is recommended to regularly clean and rinse off salt with water.

In case of installing this unit in a seashore area or a place where a snow-melting agent is applied, regularly check the status of equipment. (Replace the parts as required.)

Provide a basic structure, pole, etc. for installing the unit that are highly resistant to salt.

Concerning sulfidation caused by rubber products Do not install the unit near any rubber products (such as gaskets or rubber feet) that contain sulfur. Sulfur components in the rubber product may cause the sulfidation corrosion of parts such as electrical components and terminals, leading to malfunction.

Concerning the tightening of anchor bolts and screws The anchor bolts and screws must be tightened with an

appropriate tightening torque according to the material and strength of the installation area.

Do not use an impact driver. Use of an impact driver may damage the screws.

When tightening an anchor bolt or screw, ensure it is straight. After tightening the screws or anchor bolts, perform checks to ensure that the tightening is sufficient enough so that there is no movement or looseness.

What to avoid to ensure that the unit will perform stably over a prolonged period Using the unit for a prolonged period in a location with high

temperature and humidity levels will cause its parts to deteriorate and shorten its service life.

Ensure that a cooling unit or heating unit will not blow any air directly toward the installation location.

Page 7

Installation Instructions

Be absolutely sure to use the supplied bolts to install the camera. Do not mount the unit by employing any methods other than those

specified. Do not remodel the mounting screws provided with the unit.

Concerning humidity Install the unit when humidity is low. If the unit is installed when it is raining or humidity is high, moisture will accumulate inside the unit and the inside of the front glass may steam up.

Heater and defroster The lower temperature limit for which operation of the unit is guaranteed is 15 C (5 F). The unit is equipped with an internal heater and defroster to enable use in cold environments. The heater and defroster automatically activate when the approximate internal temperature of the unit reaches 0 C (32 F) or below. However, in harsh temperature environments of 15 C (5 F) or below, thawing of snow or frost that forms on the front glass or moving parts may not be possible. When using the unit in especially cold environments, beware of the ambient temperature and the cameras internal temperature. When using the unit in temperature environments of 15 C (5 F) or below, normal image capture may not be possible immediately after startup. In such cases, wait for the units heater to warm the inside of the camera (at least 1 hour at 15 C (5 F) or below), and then turn the unit off and then on again.

Protection from lightning When cables are used outdoors, there is a chance that they may be affected by lightning. In this case, install a lightning arrester close to the unit to prevent it from being affected by lightning, and keep the length of the network cable between the lightning arrester and the unit as short as possible.

Before installation, always disconnect the DC connector When installing, always use the supplied components. Do not disassemble or modify the wall mount adaptor.

Tightening up the mounting screws Tighten up the screws and bolts securely to the degree that is

appropriate for each of the materials used in the mounting location and structures.

After tightening up the screws and bolts, check that there is no unsteadiness and that the parts have been tightened securely.

Use the specified tools and tighten the screws firmly. Tighten up the screws using the specified torque driver. Do not

use electrical drivers or impact drivers.

When the unit is no longer going to be used, do not leave it lying around, but be absolutely sure to dispose of it properly.

When installing, transferring or disposing of the unit, be absolutely sure to hold it by its pedestal area. Problems may result if the camera head is held or rotated.

Do not attach a filter, extender or other parts to the unit.

Power switch This unit does not have a power switch. When power is supplied, the pan, tilt, zoom, and focus test operations are performed. Do not touch the unit during this time. Before proceeding with maintenance, be absolutely sure to disconnect the power plug from the power outlet.

Grounding Before operating the unit, check that SIGNAL GND has been securely grounded.

If there is a possibility of noise interference Either wire the cables so that the power cable (ceiling light cord) of AC 100 V*1 (AC 220 V*2) or more, and the signal cable are placed at least 1 meter (3.3 ft) apart. Alternatively run each cable through its own metal conduit. (The metal conduits must be grounded.)

*1 For AW-HR140PJ *2 For AW-HR140EJ

Radio signal interference If the unit is positioned near a TV or radio transmitting antenna or a strong electrical field or magnetic field (such as that generated by a motor, transformer or power lines), its images may be distorted and/ or the images may be affected by noise.

When connecting the cables, ensure that the connector areas will not be subject to any load. Doing so may cause malfunctioning.

Allowing the generated heat to escape This unit allows the heat generated inside to escape from its surfaces. Do not install the unit in a location where it will be surrounded by walls or other surfaces and where heat will be trapped. In addition, the heat is dissipated to the bottom panel which will warm up over time: This is normal and not indicative of any trouble.

PoE++ power supplies Use a PoE++ (IEEE802.3bt Draft ver.2.0 standard) compatible hub or power supply device.

Make sure installed screws do not touch any wiring inside the ceiling.

Preventing injuries and interference during operation Take measures to prevent unauthorized persons from touching or approaching the unit to prevent injuries and interference during operation.

6 7

Installation precautions (continued)

Page 8

Installation Instructions

Before installation

Be sure to configure the switches on the connector panel and bottom of the unit before installing it. Configuring the switches after the unit is installed may prove difficult.

MODE switch settings The MODE switches are located on the connector panel of the unit.

EXT

MODE

SIGNAL GND

SDI OUT 1/PM 2G/L IN

PUSH

AUDIO IN(1/2)

POWER/ STANDBY

ACT LINK

10BASE-T/ 100BASE-TXRS-422

12V IN

MODE switch

Switch positions Function

1 AW series protocol setting (Factory settings)

2 Standard protocol setting (baud rate 38400 bps)

3 Standard protocol setting (baud rate 9600 bps)

4 These are the positions for maintenance. Do not use the unit while the switches are in these positions.

How to install and connect the unit

Be absolutely sure to read through the Read this first! ( pages 4 to 5) and Installation precautions ( pages 6 to 7).

Performing the installation surface work Perform the work to weld bolts to or drive anchors into the installation surface. This section describes the case of driving in anchors and fixing with screws. The dimensions of the installation parts (positions and hole diameter) are shown below.

When fixing the camera directly to the installation surface

Unit: mm (inch)

179.7 (7-1/16)

23 0

(9 -1

/1 6)

17 6

(6 -1

5/ 16

)

4 - 8.5 ( 11/32)

Camera front

Image of AW-HR140 viewed from the bottom

Check that the mounting installation surface is level. When welding anchor bolts to the installation surface, the length

of the cut threaded section should be 40 mm (1-9/16 inches) at maximum and 30 mm (1-3/16 inches) at minimum. Minimum withdrawal strength: 1764 N {180 kgf} per bolt

Give sufficient consideration to corrosion and similar problems by, for example, using screws with corrosion-resistant coating or performing corking for the mounting screws between the camera or mount bracket and body.

Mounting the camera to the installation surface When fixing directly to the installation surface

Unit mounting bolt x4 (supplied accessory)

Spring washer and flat washer, x4 of each (supplied accessory)

Pass the cables through the bottom wiring hole or side wiring hole

before putting the camera down on the installation surface. Recommended clamping torque for mounting unit: 11.76 Nm {120 kgfcm} Minimum withdrawal strength of unit mounting bolts or mount bracket mounting screws: 1764 N {180 kgf} per bolt

When a washer nozzle will be used, attach it to the washer nozzle

mount bracket (supplied accessory) in advance and then fix the washer nozzle mount bracket in place when securing the camera in the preceding Mounting the camera to the installation surface ( page 8).

Page 9

Installation Instructions

Example of attaching the washer nozzle

Diameter of nozzle that can be attached: 16 mm ( 5/8 inches)

Washer nozzle mount bracket (supplied accessory)

Fixing the washer nozzle mount bracket

Washer nozzle

Washer hose (procure separately)

Camera front

Unit mounting screw x4 (procure separately)

Washer nozzle mount bracket (supplied accessory)

Attach the washer nozzle mount bracket to the side of the camera. Perform an installation operation check and then adjust the orientation

of the washer nozzle and check that water flows onto the front glass. To control the washer, connect pin number 2 and pin number 3 of the

EXT connector ( page 36) to the washer unit and then perform control from the camera menu or controller.

The washer fluid is not sprayed until the washer hose is filled with washer fluid.

If the limiter is set more inward than the position to be washed with the washer fluid, the washer will not operate.

To use the washer function, set [Washer] to [Yes] in the OSD or web screen. The camera head will move to the position of the washer nozzle, washer fluid will be sprayed for a specific duration, and the camera head will return to the original position. The wiper also operates momentarily during cleaning.

The washer position changes depending on whether the installation method is stand-alone or suspended. Before installing the unit, verify that the camera head moves to the washer nozzle position and confirm that the washer function operates properly. For details, consult your dealer.

Fixing the drop-prevention wire Fix the drop-prevention wire to a part of the main structure of the building or a part that is sufficiently strong (minimum withdrawal strength of 1764 N {180 kgf} or more). Separately procure M6 mounting bolts suitable for the material of the installation location.

Drop-prevention wire (supplied accessory)

Drop-prevention wire mounting screw (with hexagonal socket, for unit) (supplied accessory)

Drop-prevention wire mounting bolt (M6) (procure separately)

Attach the drop-prevention wire so the unit will not hit anybody

nearby in the event that it becomes detached.

8 9

How to install and connect the unit (continued)

Page 10

Installation Instructions

Attaching the cable cover Pass each of the cables (control cable, optional washer cable, etc.) to be connected to the unit through the supplied cable cover. Connect each of the cables to the respective connector at the rear of the unit. (Refer to Connections ( pages 12 to 16)) Connect the cable cover to the connector section at the rear of the unit and fix it in place with the four screws.

Securely tighten the four screws for attaching the cable cover to the

specified torque. Otherwise, water entering inside will cause the unit to fail or fall.

Cables

Separately sold flexible conduit

Cable cover

Wrap self-adhesive tape around

When installing the unit in an environment in which the cables need to be protected, provide a separately sold flexible conduit. Select the following recommended flexible conduit or a flexible conduit suitable for the outer diameter ( 51 mm ( 2 inches)) of the cable cover back side and protect and waterproof the connections by wrapping self- adhesive tape around.

Separately sold flexible conduit (recommended product) Manufacturer:

Eco Solutions Company, Panasonic Corporation Part no.:

Panasonic PV flexible conduit, nominal diameter DMW128N (Panasonic PV flexible conduit)

Use weatherproof cables for outdoor wiring. If a cable protection tube will not be used, after passing the cables

through the cable cover opening, fill the opening with sealing putty and then wrap self-adhesive tape around.

Cables

Sealing putty

Cable cover

Wrap self-adhesive tape around

Suspended installation When installing the unit suspended by pole installation or other means outdoors, provide a mount bracket of 350 mm ( 13-25/32 inches) or more that matches the dimensions in four places as a shelter against rain and to prevent damage from birds. For the structure of the mounting part, refer to Performing the installation surface work ( page 8).

Changing the rotation range (suspended installation)

When the unit is installed suspended, the mechanism structure needs to be switched over to enable rotation within the range of 175 degrees left and right.

1. Rotate the camera head to the position in the figure.

Front of body

Camera head

Reinforcement arm cover

Make sure the reinforcement arm cover is oriented toward the front of

the body. If the work is performed when it is at another position, a load will be applied to the cables inside the unit, leading to a failure.

2. Loosen screw A and remove the reinforcement arm cover from the body.

Screw A (M4 with hexagon socket head)

Reinforcement arm cover

How to install and connect the unit (continued)

Page 11

Installation Instructions

3. Remove the two pin fixing screws and remove the pins at the mechanism endpoint.

Positions of pins for stand-alone installation

Pins at mechanism end point

Pin fixing screws (M2 with hexagon socket heads)

4. Switch over the pins at the mechanism end point between the left and right and then reattach the pin fixing screws.

Positions of pins for suspended installation

Pins at mechanism end point

Pin fixing screws (M2 with hexagon socket heads)

5. Rotate the camera head 180 degrees in the direction of the arrow so that the top and bottom of the camera head are reversed and then attach the reinforcement arm cover to the body.

Reinforcement arm cover

Camera head

6. Install the unit suspended.

For the installation procedure, refer to the preceding Performing the installation surface work ( page 8) to Suspended installation ( page 10).

The rotation range is now switched to 180 degrees so rotation 175 degrees left and right is possible when the unit is in a suspended installation state.

To return to the stand-alone installation state, perform the work with the procedure in reverse to switch over the pins at the mechanism end point between the left and right.

Configurations are set for stand-alone installation under the factory

settings. Be sure to perform the following when using the suspended installation method. 1) Change the pins at mechanism end point 2) Set [Install Position] to [Hanging] in the camera menu ( PDF

page 48 and page 80) 3) Restart the unit (disconnect the power supply to the unit before

connecting it again) Perform operations similar to the above for stand-alone installation when switching back from a suspended installation to a stand-alone installation.

Selecting the wrong setting for [Install Position] may result in contact at the edges of the movement range and malfunction.

10 11

How to install and connect the unit (continued)

Page 12

Installation Instructions

Connections

Connections with an HD monitor

External DC power supply

EXT

MODE

SIGNAL GND

SDI OUT 1/PM 2G/L IN

PUSH

AUDIO IN(1/2)

POWER/ STANDBY

ACT LINK

10BASE-T/ 100BASE-TXRS-422

12V IN

HD monitor

HD-SDI signal

HD Integrated Camera AW-HR140

Connections with a controller (AW-RP50/AW-RP120/AK-HRP200)

EXT

MODE

SIGNAL GND

SDI OUT 1/PM 2G/L IN

PUSH

AUDIO IN(1/2)

POWER/ STANDBY

ACT LINK

10BASE-T/ 100BASE-TXRS-422

12V IN

LAN cable (crossover cable) Pan-tilt head/ camera control signals

HD Integrated Camera AW-HR140

Remote Camera Controller AW-RP50 SDI signal

External DC power supply

Monitor

Remote Camera Controller AW-RP120

External DC power supply

Accessory AC adaptor

Page 13

Installation Instructions

System example 1 (Serial control)

EXT

MODE

SIGNAL GND

SDI OUT 1/PM 2G/L IN

PUSH

AUDIO IN(1/2)

POWER/ STANDBY

ACT LINK

10BASE-T/ 100BASE-TXRS-422

12V IN

HD Integrated Camera AW-HR140

SDI video signal

Compact Live Switcher AW-HS50

Monitor 1

Monitor 2

Monitor Monitor

Pan-tilt head and camera control signal (LAN straight cable)

System TALLY

External DC power supply Remote Camera Controller

AW-RP120

Genlock signal generator

External DC power supply

RS-422 connector

Accessory AC adaptor

12 13

Connections (continued)

Page 14

Installation Instructions

System example 2 (IP control)

EXT

MODE

SIGNAL GND

SDI OUT 1/PM 2G/L IN

PUSH

AUDIO IN(1/2)

POWER/ STANDBY

ACT LINK

10BASE-T/ 100BASE-TXRS-422

12V IN

HD Integrated Camera AW-HR140

Genlock signal generator

SDI video signal

Switching hub

LAN cable (straight cable)

Compact Live Switcher AW-HS50

Monitor 1

Monitor 2

Monitor Monitor

LAN cable (straight cable)

Remote Camera Controller AW-RP50

Accessory AC adaptor

External DC power supply

LAN connector

Connections (continued)

Page 15

Installation Instructions

System example 3 (IP image transmission, PoE++)

EXT

MODE

SIGNAL GND

SDI OUT 1/PM 2G/L IN

PUSH

AUDIO IN(1/2)

POWER/ STANDBY

ACT LINK

10BASE-T/ 100BASE-TXRS-422

12V IN

HD Integrated Camera AW-HR140

PoE++ compatible switching hub or injector

LAN cable (straight cable)

Network Recorder WJ-NV300/4

Personal computer

LAN connector

14 15

Connections (continued)

Page 16

Installation Instructions

System example 4 (connection with commercially available controller)

EXT

MODE

SIGNAL GND

SDI OUT 1/PM 2G/L IN

PUSH

AUDIO IN(1/2)

POWER/ STANDBY

ACT LINK

10BASE-T/ 100BASE-TXRS-422

12V IN

HD Integrated Camera AW-HR140

Commercially available controller

External DC power supply

Serial connector

Communication connector

Configure the MODE switches at the connector panel of the unit. For details on the MODE switches, see MODE switch settings ( page 8).

Configure the following items in the camera menu. 1. Display [System] menu - [Protocol] - [Model Select]. 2. Select [SEVIHD1], [SBRC300], or [SBRCZ330] for the protocol type.

The unit is not equipped with a daisy-chain connection function for connecting multiple units.

System example 5 (optical fiber system/audio connection using PoE++)

EXT

MODE

SIGNAL GND

SDI OUT 1/PM 2G/L IN

PUSH

AUDIO IN(1/2)

POWER/ STANDBY

ACT LINK

10BASE-T/ 100BASE-TXRS-422

12V IN

HD Integrated Camera AW-HR140

PoE++ compatible switching hub or injector

DC power supply

SDI monitor

SDI signalSDI signal

Audio signal (CH1/CH2) Line input is used for the units external audio input. When connecting a microphone or other devices with different levels, match the level using an amp, for example.

Optical fiber cable

SDI/optical signal conversion module

Transmitter (transmitting side)

Receiver (receiving side)

Connections (continued)

Page 17

Installation Instructions

Appearance

Unit: mm (inch)

356.6 (14-1/32)

396.9 (15-19/32)

179.7 (7-1/16)

( 2

)

10 2

(4 -1

/3 2)

35 7.

1 (1

4- 1/

16 )

27 5.

6 (1

0- 27

/3 2)

28 5.

6 (1

1- 1/

23 0

(9 -1

/1 6)

17 6

(6 -1

5/ 16

)

4 8.5 ( 11/32)

25 7.

5 (1

0- 1/

16 17

Page 18

Operating Instructions

Read this first! (For AW-HR140PJ)

WARNING: To reduce the risk of fire or electric shock, do not expose this

equipment to rain or moisture. To reduce the risk of fire or electric shock, keep this equipment

away from all liquids. Use and store only in locations which are not exposed to the risk of dripping or splashing liquids, and do not place any liquid containers on top of the equipment.

WARNING: Always keep the mounting bolt, washer, spring washer and drop-prevention wire mounting screw out of the reach of infants and small children.

CAUTION: Do not remove panel covers by unscrewing. To reduce the risk of electric shock, do not remove the covers. No user serviceable parts inside. Refer servicing to qualified service personnel.

CAUTION: In order to maintain adequate ventilation, do not install or place this unit in a bookcase, built-in cabinet or any other confined space. To prevent risk of electric shock or fire hazard due to overheating, ensure that curtains and any other materials do not obstruct the ventilation.

CAUTION: To reduce the risk of fire or electric shock and annoying interference, use the recommended accessories only.

CAUTION: Check the installation at least once a year. An improper installation could cause the unit to fall off resulting in personal injury.

FCC NOTICE (USA) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Warning: To assure continued FCC emission limit compliance, follow the attached installation instructions and the user must use only shielded interface cables when connecting to host computer or peripheral devices. Also, any unauthorized changes or modifications to this equipment could void the users authority to operate this device.

NOTIFICATION (Canada) CAN ICES-3 (A)/NMB-3(A)

indicates safety information.

ENGLISH

Page 19

Operating Instructions

Read this first! (For AW-HR140EJ)

WARNING: To reduce the risk of fire or electric shock, do not expose this

equipment to rain or moisture. To reduce the risk of fire or electric shock, keep this equipment

away from all liquids. Use and store only in locations which are not exposed to the risk of dripping or splashing liquids, and do not place any liquid containers on top of the equipment.

WARNING: Always keep the mounting bolt, washer, spring washer and drop-prevention wire mounting screw out of the reach of infants and small children.

WARNING: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.

CAUTION: To reduce the risk of fire or electric shock and annoying interference, use the recommended accessories only.

CAUTION: Chec