Panasonic AW-HE42WP v2 Operating Instructions

Pages 76

Year 2019

Language(s)

of 76

Operating Instructions

160 pages

Operating Instructions

76 pages

Page 1

ENGLISH DVQX1917ZA

CX0419RA0 -FJ Printed in China

Before operating this product, please read the instructions carefully and save this manual for future use.

ENGLISH Excerpted Version

Before installing and using this product, be sure to read Read this first! (pages 5, 28 to 34). This manual contains information excerpted from the Operating Instructions. For more information, please visit the Panasonic website (https://pro-av.panasonic.net/manual/en/index.html), and refer to the Operating Instructions.

FRANAIS Avant dinstaller et dutiliser cet appareil, sassurer de lire la section Lire ces informations en premier ! (pages 5, 35 39). Pour de plus amples informations, visiter le site Web de Panasonic (https://pro-av.panasonic.net/manual/en/index. html) et consulter le mode demploi et les instructions dinstallation.

ESPAOL Antes de instalar y usar este producto, asegrese de leer Lea esto primero (pginas 5, 40 a 44). Si desea obtener ms informacin, visite el sitio web de Panasonic (https://pro-av.panasonic.net/manual/en/index. html) y consulte las instrucciones de funcionamiento y las instrucciones de instalacin.

DEUTSCH Bitte lesen Sie sorgfltig Bitte lesen Sie zuerst diesen Hinweis! vor der Installation und Nutzung dieses Produkts. (Seiten 6, 45 bis 47). Weitere Informationen finden Sie auf der Panasonic-Webseite (https://pro-av.panasonic.net/manual/en/index. html), in der Bedienungsanleitung und in der Installationsanleitung.

ITALIANO Prima di installare e utilizzare il prodotto, assicurarsi di leggere Leggere prima quanto segue! (pagine 6, 48 a 50). Per maggiori informazioni, visitare il sito Web Panasonic (https://pro-av.panasonic.net/manual/en/index.html) e fare riferimento alle istruzioni per luso e alle istruzioni per linstallazione.

! (. 6, 51 53). - Panasonic (https://pro-av.panasonic.net/ manual/en/index.html) .

PJ EJ

Operating Instructions Excerpted Version

Installation Instructions provided

HD Integrated Camera

Model No. AWHE42WP Model No. AWHE42KP Model No. AWHE42WE Model No. AWHE42KE

Page 2

Hrvatski Za sigurnosne informacije i vane obavijesti o proizvodu posjetite sljedeu internetsku stranicu.

etina Na nsledujcm webu najdete bezpenostn informace a dleit poznmky k tomuto produktu.

Dansk Besg flgende webside for sikkerhedsinformation og vigtige bemrkninger vedrrende produktet.

Nederlands Ga naar de volgende website voor veiligheidsinformatie en belangrijke meldingen over het product.

Eesti Toodet puudutava ohutusteabe ja oluliste mrkuste saamiseks klastage jrgmist veebilehte.

Suomi Ky seuraavalla verkkosivulla saadaksesi turvallisuustietoja ja trkeit tietoja liittyen laitteeseen.

, .

Magyar A termkkel kapcsolatos biztonsgi informcikrt s fontos rtestsekrt ltogasson el az albbi weboldalra.

Latvieu Lai iegtu informciju par drobu un skattu svargus paziojumus par o produktu, apmekljiet tlk nordto tmeka vietni.

Lietuvi Jei reikia saugos informacijos ir svarbi praneim apie gamin, apsilankykite toliau nurodytoje svetainje.

Polski Informacje o bezpieczestwie i wane informacje o produkcie znajduj si w poniszej witrynie internetowej.

Portugus Consulte o seguinte website para as informaes de segurana e importantes notificaes sobre o produto.

Romn Vizitai urmtoarea pagin web pentru informaii de securitate i notificri importante cu privire la produs.

Slovensky Pre bezpenostn informcie a dleit oznmenia svisiace s produktom navtvte tto webov strnku.

Slovenina Za varnostne informacije in pomembna obvestila v zvezi z izdelkom obiite naslednje spletno mesto.

Svenska Besk fljande webbplats fr skerhetsinformation och viktiga meddelanden om produkten.

https://pro-av.panasonic.net/manual/en/index.html

Page 3

Trademarks and registered trademarks

Microsoft, Windows, Windows 7, Windows 8, Windows 8.1, Internet Explorer and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.

Intel and Intel CoreTM are trademarks or registered trademarks of Intel Corporation in the United States and other countries.

Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

microSDXC Logo is a trademark of SD-3C, LLC. Apple, Mac, OS X, iPhone, iPod Touch, iPad, and Safari

are registered trademarks of Apple Inc., in the United States and other countries.

AndroidTM is a trademark of Google LLC. Other names of companies and products contained

in these Operating Instructions may be trademarks or registered trademarks of their respective owners.

About copyright and licence

Distributing, copying, disassembling, reverse compiling, reverse engineering, and also exporting in violation of export laws of the software provided with the unit are expressly prohibited.

This product incorporates the following software: (1) the software developed independently by or for Panasonic

Corporation, (2) the software owned by third party and licensed to Panasonic

Corporation, (3) the software licensed under the GNU General Public License,

Version 2.0 (GPL V2.0), (4) the software licensed under the GNU LESSER General Public

License, Version 2.1 (LGPL V2.1), and/or (5) open source software other than the software licensed under the

GPL V2.0 and/or LGPL V2.1.

The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. For details, refer to the license conditions that appear when the operation described in the Operating Instructions (PDF) Web screen configurations Maintenance screen [Maintenance] Product information tab [Product info.] OSS license display is performed. At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0 or LGPL V2.1, as well as the respective copyright notice thereof. Contact Information: [email protected]

The source code and the copyright notice are also available for free in our website below. https://panasonic.net/cns/oss/index.html

Abbreviations

The following abbreviations are used in this manual.

Microsoft Windows 7 Professional SP1 32/64-bit is abbreviated to Windows 7.

Microsoft Windows 8 Pro 32/64-bit is abbreviated to Windows 8.

Microsoft Windows 8.1 Pro 32/64-bit is abbreviated to Windows 8.1.

Windows Internet Explorer 8.0, Windows Internet Explorer 9.0, Windows Internet Explorer 10.0 and Windows Internet Explorer 11.0 are abbreviated to Internet Explorer.

For the purposes of this manual, the model numbers of the units are given as listed in the table below.

Model number of unit

Model number given in manual

AW-HE42WP, AW-HE42KP, AW-HE42WE, AW-HE42KE

AW-HE42

AW-HS50N AW-HS50

AW-HS50E

AW-RP50N AW-RP50

AW-RP50E

Illustrations and screen displays featured in the manual

What is shown in the manuals illustrations and screen displays may differ from how it is actually appears.

The screenshots are used in accordance with the guidelines of Microsoft Corporation.

Page 4

Contents

Installation Instructions

Operating Instructions

Read this first! (For AW-HE42WP, AW-HE42KP) 28

Read this first! (For AW-HE42WE, AW-HE42KE) 31

Lire ces informations en premier ! (Pour AW-HE42WP, AW-HE42KP) 35

Lire ces informations en premier ! (Pour AW-HE42WE, AW-HE42KE) 37

Lea esto primero (Para AW-HE42WP, AW-HE42KP) 40

Lea esto primero (Para AW-HE42WE, AW-HE42KE) 42

Bitte lesen Sie zuerst diesen Hinweis! (Fr AW-HE42WE, AW-HE42KE) 45

Leggere prima quanto segue! (Per AW-HE42WE, AW-HE42KE) 48

! ( AW-HE42WE, AW-HE42KE) 51

Before use 54

Overview 54

Required personal computer environment 54

Disclaimer of warranty 55

Network security 55

Read this first! 5

Lire ces informations en premier ! 5

Lea esto primero 5

Bitte lesen Sie zuerst diesen Hinweis! 6

Leggere prima quanto segue! 6

! 6

Installation precautions 7

How to install and connect the unit 9

When using the WV-Q105A (optional accessory) 13

Removing the camera 15

Stand-alone installation (when the mount bracket is going to be used) 16

Stand-alone installation (when the mount bracket is not going to be used) 18

When installing the unit on a desktop 18

When mounting the unit on a tripod 18

Connections 19

Connecting an NDI|HX compatible switcher 19

Connecting a controller (AW-RP50) (IP connection example) 20

System example 1 (connection with commercially available controller, RS-232C daisy-chain connection) 21

System example 2 (connection with commercially available controller, RS-422 connection) 22

System example 3 (serial control) 23

System example 4 (IP control) 24

System example 5 (infrared output connection) 25

System example 6 (IP image transmission, PoE+) 25

System example 7 (USB connection, Web camera) 26

Appearance 27

Characteristics 56

Accessories 58

Optional accessories 58

Operating precautions 59

Concerning the wireless remote control (optional accessory) 61

Parts and their functions 62

Camera unit 62

Wireless remote controller (optional accessory) 65

Setting the remote control IDs 67

Network settings [When using Windows] 68

Use the Easy IP Setup Software to establish the units settings 68

Installing the plug-in viewer software 69

User authentication 70

Troubleshooting 71

Specifications 72

Index 73

Page 5

Installation Instructions

indicates safety information.

WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

CAUTION: This camera intended for use only with the Mount Bracket enclosed with the unit and Panasonic Direct Ceiling Mount Bracket, WV-Q105A. Use with other apparatus is capable of resulting in instability causing possible injury.

WARNING: Installation should only be performed by qualified installation personnel. Improper installation may result in the entire apparatus falling down and causing injury.

Read this first!

ATTENTION: Cette camra est conue pour tre utilise uniquement avec la potence de fixation fournie avec lappareil ou avec la potence de fixation directe au plafond Panasonic WV-Q105A. Lutilisation de tout autre dispositif risque de se traduire par une instabilit et tre cause de blessures des personnes.

Lire ces informations en premier !

Informations concernant la scurit.

AVERTISSEMENT: Pour viter tout risque de blessures, lappareil doit tre solidement fix au plancher/mur conformment aux instructions dinstallation.

AVERTISSEMENT: Linstallation ne doit tre effectue que par du personnel dinstallation qualifi. Une mauvaise installation peut avoir pour consquence la chute de lappareil et provoquer des blessures.

Lea esto primero

PRECAUCIN: Esta cmara ha sido diseada para ser utilizada solamente con la mnsula de montaje suministrada con la unidad y con la mnsula de montaje directo en el techo de Panasonic modelo WV-Q105A. La utilizacin con otros aparatos puede causar inestabilidad y posibles lesiones.

indica informacin de seguridad.

ADVERTENCIA: Para evitar heridas, este aparato debe estar firmemente instalado al piso/pared de acuerdo con las instrucciones de instalacin.

ADVERTENCIA: La instalacin solamente debe llevarla a cabo personal cualificado. Una instalacin incorrecta podra provocar la cada del dispositivo y causar lesiones.

ENGLISH

FRANAIS

ESPAOL

Page 6

Installation Instructions

Bitte lesen Sie zuerst diesen Hinweis!

WARNUNG: Um Verletzungen zu verhten, muss dieser Apparat gem der Installationsanleitung sicher am Boden bzw. an der Wand befestigt werden.

VORSICHT: Diese Kamera ist nur fr den Einsatz mit der mitgelieferten Montagehalterung und der Panasonic Decken-Direktmontagehalterung WV-Q105A vorgesehen. Wird die Kamera mit anderen Apparaten verwendet, kann es zu Instabilitt kommen, die Verletzungen verursachen kann.

WARNUNG: Die Installation darf nur durch qualifiziertes Personal ausgefhrt werden. Fehlerhafte Installation kann zum Herunterfallen des Gertes und zu Verletzungen fhren.

ist die Sicherheitsinformation.

Leggere prima quanto segue!

PRECAUZIONE: La videocamera deve essere utilizzata esclusivamente con la staffa di montaggio in dotazione con lunit e con la staffa per montaggio diretto a soffitto WV-Q105A. Luso con altri apparecchi potrebbe causare instabilit ed eventuali infortuni.

sono le informazioni sulla sicurezza.

AVVISO: Per prevenire ferite, questo apparecchio deve essere montato saldamente al pavimento/muro in conformit alle istruzioni di installazione.

AVVISO: Linstallazione deve essere realizzata unicamente da tecnici qualificati. Uninstallazione incorretta pu risultare nella caduta dellapparecchio con conseguenti danni alle persone.

: , , Panasonic WV-Q105A. .

, .

: / .

: . .

DEUTSCH

ITALIANO

Page 7

Installation Instructions

Installation precautions Panasonic does not accept any responsibility for accident or damage during installation if procedure in this manual is not followed.

To installation personnel Read the Installation Instructions thoroughly and then perform the operation correctly and safely. Also, always read the Read this first! (page 5) of this manual as they contain important information. After the installation, give the Installation Instructions to the customer to save for future use.

Ensure that the installation work complies with the technical standards governing electrical equipment.

The unit is for indoor use only. It cannot be used outdoors. Avoid installation in a location where the unit will be exposed to direct sunlight for extended periods or near a cooling or heating appliance. Otherwise, deformation, discoloration, malfunctioning and/or problems in operation may result. Operate the unit where it will not be splashed or sprayed by water.

Use the unit with an installation where the unit is suspended from an overhead surface or with a stand-alone installation. Do not use the unit on its side or tilted at an angle.

Be absolutely sure to use the four bracket mounting screws (M4) for mounting the mount bracket. These are supplied with the unit. Do not use wood screws, nails, etc. In the case of a concrete ceiling, secure the unit using anchor bolts (for M4) or AY plug bolts (for M4). Recommended clamping torque M4: 1.47 N m {15 kgf cm}

The withdrawal strength of the mounting location for each screw must be at least 196 N {20 kgf}.

When mounting the unit on a ceiling made of plasterboard, for instance, if it is not strong enough to support its weight, either reinforce the ceiling adequately or use the WV-Q105A direct ceiling mount bracket, which is sold separately.

When using a mount bracket which is sold separately, read the handling instructions.

Do not hold the camera head while undertaking the installation work. Doing so may cause malfunctioning.

Correct IncorrectCorrect Incorrect

Desktop installation Hanging installation

Notes

AW-HE42 main unit

Mounting conditions

Applicable mount bracket Mounting onto the ceiling

Mass Model No. Mass Mounting Recommended screws

No. of screws

Minimum withdrawal strength (per screw)

Approx. 1.5 kg [3.30 lb]

Direct mount (supplied

accessory)

Approx. 0.23 kg [0.51 lb]

Hanging/Desktop M4 screws (supplied

accessory) 4

196 N {20 kgf} Ensure that the mounting strength can support a weight that is at least five times the total mass of the equipment, including the cameras main unit.

WV-Q105A (optional

accessory)

Approx. 0.15 kg [0.33 lb]

For ceiling M4 screws

(supplied with the WV-Q105A)

Concerning the installation location Install the unit in a stable location which will not be susceptible to shaking. If the unit is installed in a location which is susceptible to shaking, this will cause the units images to shake in turn. Install the unit after conferring in detail with your dealer. Install the unit on a ceiling that is strong enough (such as a concrete ceiling). If the unit is to be installed on a ceiling which is not strong enough, reinforce the ceiling sufficiently first.

Do not install or use the unit in the following kinds of locations.

On walls (where the unit would be installed sideways) In locations (including places such as under the eaves of

a building) where the unit would be directly exposed to rain or water

In locations such as kitchens where there are high concentrations of steam and grease

In outdoor locations or hot places where the temperature will exceed 40 C (104 F)

In cold locations where the temperature will drop below 0 C (32 F)

In locations where the humidity will exceed 90 % In locations where chemicals are used such as near

swimming pools At sea, in coastal areas or in locations where corrosive

gases are emitted In locations where radiation, X-rays, or strong radio waves

or magnetic fields are generated In locations where the unit would be subject to a great

deal of vibration such as on board a vehicle or ship (the unit is not designed to be used in vehicles)

In locations where the temperature is subject to sudden changes such as near the air outlet of an air conditioner or near a door which allows the outside air to come in

What to avoid to ensure that the unit will perform stably over a prolonged period

Using the unit for a prolonged period in a location with high temperature and humidity levels will cause its parts to deteriorate and shorten its service life.

Ensure that a cooling unit or heating unit will not blow any air directly toward the installation location.

Page 8

Installation Instructions

Installation precautions (continued)

Be absolutely sure to use the specified brackets and screws to install the camera.

Do not mount the unit by employing any methods other than those specified.

Do not remodel the mounting bracket or mounting screws provided with the unit.

Before installation, always disconnect the power plug When installing, always use the supplied components. Do not disassemble or modify the wall mount adaptor.

Tightening up the mounting screws Tighten up the screws and bolts securely to the degree

that is appropriate for each of the materials used in the mounting location and structures.

After tightening up the screws and bolts, check that there is no unsteadiness and that the parts have been tightened securely.

Use the specified tools and tighten the screws firmly. Tighten up the screws using the specified torque driver.

Do not use electrical drivers or impact drivers.

When the unit is no longer going to be used, do not leave it lying around, but be absolutely sure to remove it properly. For details on how to remove the unit, refer to Removing the camera (page 15).

When installing, transferring or disposing of the unit, be absolutely sure to hold it by its pedestal area. Problems may result if the camera head is held or rotated.

Do not attach a filter, hood, extender or other parts to the unit.

Use the dedicated AC adaptor and power cable provided with the unit. Connect the AC adaptor and power cable to the power inlet securely.

Installing the AC adaptor Do not place the adaptor directly onto a ceiling panel or

other such surface. Extreme danger is posed when water has collected on the surface as a result of leaking rain, for instance. Secure the adaptor firmly to the bottom or other surface of a reinforcing member made of channel steel where dust and other foreign matter will not accumulate. (Refer to page 13.)

Secure the adaptor firmly so that there will be no chance that it will fall off or fall down. Secure it using a strength which can withstand the mass of the AC adaptor.

Install the accessory AC adaptor near the main power outlet, and position it in such a way that its power plug can be plugged into and unplugged from the outlet easily. When connecting the AC adaptor to a power outlet on the ceiling or on any other surface where dust may collect, wipe off the dust on the power plug at periodic intervals as an anti- tracking measure.

Power switch The unit does not have a power switch. The power turns on when its power plug is connected to a power outlet. When the power is turned on, the pan, tilt, zoom and focusing operations are performed. Before proceeding with maintenance, be absolutely sure to disconnect the power plug from the power outlet.

Connecting the power cable Be absolutely sure to connect the power cable of the AC adaptor through a circuit breaker using one of the following methods.

(1) Connect the power cable through a power control unit. (2) Connect the power cable to a circuit breaker in a

power distribution panel with a contact distance of 3.0 mm (1/8 inches) or more. Use a circuit breaker which is capable of shutting off all the poles of the main power supply with the exception of the protective ground conductor.

(3) Install the AC adaptor near the power outlet, and connect it through the power plug.

If there is a possibility of noise interference Either wire the cables so that the power cable (ceiling light cord) of AC 100 V* [AC 220 V**] or more, and the signal cable are placed at least 1 meter (3.3 ft) apart. Alternatively run each cable through its own metal conduit. (The metal conduits must be grounded.)

* : For AW-HE42WP, AW-HE42KP ** : For AW-HE42WE, AW-HE42KE

Radio signal interference If the unit is positioned near a TV or radio transmitting antenna or a strong electrical field or magnetic field (such as that generated by a motor, transformer or power lines), its images may be distorted and/or the images may be affected by noise.

When connecting the cables, ensure that the connector areas will not be subject to any load. Doing so may cause malfunctioning.

Allowing the generated heat to escape The unit allows the heat generated inside to escape from its surfaces. Do not install the unit in a location where it will be surrounded by walls or other surfaces and where heat will be trapped. In addition, the heat is dissipated to the bottom panel which will warm up over time: This is normal and not indicative of any trouble.

PoE+ power supplies Use a PoE+ (IEEE802.3at compliant) compatible hub or power supply device.

Page 9

Installation Instructions

How to install and connect the unit Be absolutely sure to read through the Read this first! (page 5) and Installation precautions (pages 7 to 8).

The procedure given here is for the kind of installation where the unit is suspended from an overhead surface, but the same steps are followed for a stand-alone installation.

If the ceiling panel is not strong enough to bear the units weight, use the kind of mount bracket that is supported by anchor bolts between the concrete ceiling and ceiling panel. The unit supports the WV-Q105A direct ceiling mount bracket which is used solely for combination cameras. Use this bracket to install the unit. (See page 13.) In a case like this, the holes ( 60 mm [ 2-3/8 inches]) for installing the direct ceiling mount bracket on the ceiling must be drilled in the ceiling panel. It is also recommended that you provide an inspection space or opening for access purposes in the area near where the equipment is installed in order to facilitate installation and the wiring connections work. See page 58 for details of the accessories.

1 Check the mounting space. Refer to the illustration, and determine where the unit is to be installed and in which direction it should be mounted.

Factor in the unit mounting area and include space for the wires extending from its rear panel. The asterisk () in the illustration marks the position and dimensions of the hole for mounting the mount bracket.

66 (2-19/32)

130 (5-1/8)

() 83.5 (3-9/32)

156 (6-1/8) 160 (6-5/16)

78 (3

-1 /1

6) 65

(2 -9

/1 6)

80 (3

-5 /3

2) 77

(3 -1

/3 2)

90 (3

-1 7/

32 )

( ) 4

6 ( 1-1

3/1 6)

99 (3

-2 9/

32 )

(Space for the wires from the rear panel)

29 0

(1 1-

7/ 16

) o

r m

o re

(S p

ac e

fo r

th e

w ir

es )

Hole for checking the positioning

The front panel of the unit on this side

Unit: mm (inch)

Mount bracket

Hook for mounting the drop-prevention wire

Unit mounting area

Through-hole for cable 40 ( 1-9/16) [reference]

() Holes for mounting the mount bracket: 4.5 4

Hole for mounting the main unit mounting screw

Hole for installing the WV-Q105A direct ceiling mount bracket [ 60 ( 2-3/8)]

Make connections for each cable within the ceiling beforehand, and pass the cables through a cable-routing hole in preparation for making connections for and installing the unit.

For a power outlet which is used on the ceiling, be absolutely sure to take measures to deal with the tracking that may be caused by the accumulation of dust and other foreign matter.

Notes

Page 10

Installation Instructions

How to install and connect the unit (continued)

2 Mount the mount bracket onto the installation surface. Use the bracket mounting screws [M4, bind-head: 10 mm (13/32 inches) long] supplied with the unit. For proper clamping torque, securely attach the screws using the specified tools.

Screw diameter Clamping torque

M4 1.47 N m {15 kgf cm}

Bracket mounting screws 4 (supplied) (M4, bind-head)

Use only the screws supplied with the unit. Do not use any other screws such as wood screws, nails, etc.

Note

3 Attach the drop-prevention wire. Pull out the drop-prevention wire from the bottom panel of the unit, and engage the end with the wire ring through the

hole of the mount bracket hook. Pull the drop-prevention wire, and check that it has been attached securely to the hook.

Pull out the drop-prevention wire, and engage it with the mount bracket hook.

End of hook

Drop-prevention wire

Holding spring

Do not do this work while holding the camera head since doing so may result in malfunctioning of the unit. The drop-prevention wire is designed to be used for installation where the unit is suspended from an overhead

surface so do not subject it to the weight of units other than the unit.

Notes

Page 11

Installation Instructions

How to install and connect the unit (continued)

4 Mount the unit. Align the position of the hole for checking the positioning with the status display lamp. Align the holes on the camera main unit used to insert the bottom panel with the protrusions on the mount bracket used

for inserting the camera, push the camera to the bracket firmly, and rotate the main unit by about 15 degrees in the direction of the arrow.

Secure the unit to the mount bracket using the main unit mounting screw (M3) as supplied. Attach the mount bracket securely with the prescribed tool using the clamping torque below.

Be absolutely sure to verify that none of the screws are loose.

Screw diameter Clamping torque

M3 0.78 N m {8 kgf cm}

Main unit mounting screw (M3 screw) (with flat washer, spring washer)

Status display lamp

Approx. 15

On the camera main unit: Holes (3) used to insert the bottom panel

On the mount bracket: Protrusions (3) used for inserting the camera

Hole for checking the positioning

Do not do this work while holding the camera head since doing so may result in malfunctioning of the unit. Use only the screws supplied. Do not use any other screws. Check that the unit has been mounted securely with no tilting or wobbling. The unit must be secured without fail using the main unit mounting screw before any of the cables are connected.

Notes

5 Check the mounting. Check out the following points.

The main unit mounting screw must be mounted securely. The unit must not tilt, and it must be mounted exactly. The unit must be securely installed. The unit pedestal part must not rotate even when an attempt is made to turn it.

Page 12

Installation Instructions

How to install and connect the unit (continued)

6 Connect the rear panel connectors. Anchor the AC adaptor cable in place using the cable clamp.

Cable clamp

Strap part

LAN cable

LAN cable (for RS-422)

RS-232C cable

HDMI cable

SDI cable

AC adaptor cable

Coaxial cable (for G/L IN)

How to secure the AC adaptor cable

A Loosely secure the cable clamp.

B Fasten the cable clamp.

Loosely secure the cable clamp in the area shown above.

Take hold of the strap part, slide the cable clamp until it stops moving, and then secure it tightly.

Always disconnect the power supply before connecting or disconnecting cables. Connecting or disconnecting cables while the power is turned on may result in malfunctions.

Note

The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always live as long as the AC adaptor is connected to an electrical outlet.

Page 13

Installation Instructions

How to install and connect the unit (continued)

When using the WV-Q105A (optional accessory) It is recommended that you provide an inspection opening or other such space for access purposes in the area near where the equipment is installed in order to facilitate installation and the wiring connections work. Before mounting the mount bracket, check that the installation location is strong enough to withstand the total mass (approx. 2.0 kg [4.41 lb]) which will be exerted once the camera is mounted. When installing the unit on a ceiling, ensure that there is at least 100 mm (3-15/16 inches) of space above the ceiling panel in the place where the unit will be used. The unit can be installed on a ceiling panel with a thickness ranging from 5 mm (3/16 inches) to 40 mm (1-9/16 inches). The drop-prevention wire (supplied with the WV-Q105A) must be used when mounting the direct ceiling mount bracket.

Height above ceiling panel: At least 100 mm (3-15/16 inches) The anchor bolts must not protrude

beneath the ceiling panel.

Ceiling panel (plasterboard, etc.) with a thickness from 5 mm (3/16 inches) to 40 mm (1-9/16 inches)

Anchor bolts Withdrawal strength: 196 N {20 kgf} or more

60 mm (2-3/8 inches)

Concrete ceiling

When installing the unit on a ceiling

1 Refer to the Operating Instructions of the WV-Q105A direct ceiling mount bracket, and attach the WV-Q105A as well as the drop-prevention wire angle and drop-prevention wire supplied with the WV-Q105A to the anchor bolts.

Mounting the anchor bolts and direct ceiling mount bracket () This job is facilitated if the direct ceiling mount bracket is loosely secured to the ceiling panel in one place, and the direct ceiling mount bracket and anchor bolts are vertically aligned before the nuts are tightened up.

2 First, remove the screws which were loosely fastened in step 1, and then align the camera mount bracket of the AW-HE42 with the screw holes in the WV-Q105A direct ceiling mount bracket and mount it in place.

Use the mounting screws (the M4-L60 Phillips head screws with adhesive) supplied with the WV-Q105A as the mounting screws.

Fasten the AC adaptor securely to the bottom or other surface of the reinforcing member made of channel steel where dust and other foreign matter will not accumulate.

Do not place the AC adaptor directly onto the ceiling panel or other such surface.

AW-HE42

Drop-prevention wire angle (Supplied with WV-Q105A) Anchor bolts

Space above the ceiling

Direct ceiling mount bracket WV-Q105A (optional accessory)

Drop-prevention wire (Supplied with WV-Q105A)

Plasterboard or other ceiling panel

Camera mount bracket (Supplied with AW-HE42)

Mounting screws 4 (Supplied with WV-Q105A)

Channel steel

Secure the AC adaptor firmly to a member made of channel steel.

(Ceiling panel)

Inspection opening recommended The installation and wiring connection

work is facilitated if an inspection opening is provided for access purposes.

(): Fasten here using the nut.

3 Install the AW-HE42 camera by following the procedure starting with step 3 on page 10.

Page 14

Installation Instructions

How to install and connect the unit (continued)

When installing the unit on a wall (installation example)

1 Before proceeding, fashion an L-shaped mounting fixture, and attach the fixture securely to the wall where the unit will be installed.

IMPORTANT Before installing the unit, check that the surface of the wall where the unit will be installed is strong enough to

bear not only the total weight (approx. 2.0 kg [4.41 lb]) of the camera once it has been installed but also the weight of the L-shaped mounting fixture and its supports.

Use supports that are strong enough to withstand the total weight of the camera once it has been installed and any vibration or other forces to secure the L-shaped mounting fixture. If the supports are not capable of bearing this weight and forces, the unit may become detached from the installation surface or it may fall off, possibly causing injury.

AW-HE42

L-shaped mounting fixture

Support

2 Refer to steps 1 to 3 in When installing the unit on a ceiling (page 13), and install the AW-HE42.

Page 15

Installation Instructions

Removing the camera 1 Turn off the circuit breaker and power.

2 Disconnect the cables. Disconnect the power cable, video cable, and control cable, etc.

3 Remove the main unit mounting screw used to secure the unit and mount bracket.

4 Push the unit (A). Turn it approximately 15 degrees away from the installed position (B), and remove it (C).

Main unit mounting screw (M3 screw) (with flat washer, spring washer)

Approx. 15

Do not do this work while holding the camera head since doing so may result in malfunctioning of the unit.

Note

5 Disengage the drop-prevention wire from the mount bracket.

Page 16

Installation Instructions

Stand-alone installation (when the mount bracket is going to be used)

The same steps are followed as for the kind of installation where the unit is suspended from an overhead surface (pages 9 to 12).

1 Check the mounting space.

As with installing the unit suspended from an overhead surface, carefully check the space where the unit will be mounted, and then decide if it is appropriate to install the unit in that space.

Note

2 Mount the mount bracket onto the installation surface.

Bracket mounting screws 4 (supplied) (M4, bind-head)

3 Attach the drop-prevention wire.

for inserting the camera, push the camera to the bracket firmly, and rotate the main unit by about 15 degrees in the direction of the arrow.

Secure the unit to the mount bracket using the main unit mounting screw (M3) as supplied.

Main unit mounting screw (M3 screw) (with flat washer, spring washer)

Status display lamp

On the camera main unit: Holes (3) used to insert the bottom panel

On the mount bracket: Protrusions (3) used for inserting the camera

Hole for checking the positioning

Attach the drop-prevention wire.

Approx. 15

Page 17

Installation Instructions

Stand-alone installation (when the mount bracket is going to be used) (continued)

5 Check the mounting.

6 Connect the rear panel connectors.

LAN cable

HDMI cable

SDI cable

AC adaptor cable

Cable clamp

Strap part

How to secure the AC adaptor cable

A Loosely secure the cable clamp.

B Fasten the cable clamp.

Loosely secure the cable clamp in the area shown above.

Take hold of the strap part, slide the cable clamp until it stops moving, and then secure it tightly.

RS-232C cable

LAN cable (for RS-422)

Coaxial cable (for G/L IN)

Always disconnect the power supply before connecting or disconnecting cables. Connecting or disconnecting cables while the power is turned on may result in malfunctions.

Note

The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always live as long as the AC adaptor is connected to an electrical outlet.

Note for connecting with an HDMI cable When connecting with an HDMI cable using an HDMI-to-DVI converter, etc., be sure to connect the HDMI cable to the connector of the AW-HE42 last. Connecting the HDMI cable to the connector of the AW-HE42 first may result in malfunction.

2 1AW-HE42

HDMI cable

HDMI-to-DVI converter, etc.

Switcher

Monitor

Page 18

Installation Instructions

Stand-alone installation (when the mount bracket is not going to be used)

When installing the unit on a desktop Place the unit flat on the surface.

Install the unit in a stable location which will not be susceptible to shaking. If the unit is installed in a location which is susceptible to shaking, this will cause the units images to shake in turn.

Take care not to allow the unit to fall or otherwise be damaged during installation. When carrying the unit, do not hold it by its head. Do not take hold of the camera head or rotate it. Doing so may cause malfunctioning. Take care not to pull the connected cables. Doing so may cause the unit to fall and/or it may result in injury.

Notes

Ensure that the unit will not fall off.

Correct Incorrect

When mounting the unit on a tripod Attach the tripod to the threaded holes for mounting the camera on the cameras bottom panel. Place the tripod on a completely flat and level surface. Tighten the screws by hand to mount the tripod securely. Use screw for mounting tripod that satisfy the following standard.

Screw for mounting tripod 1/4-20UNC, ISO1222 (6.35 mm)

4.5 mm to 6 mm (0.18 to 0.24 inches)

Do not install the unit where people will be passing back and forth. When using the unit mounted on a tripod, do not put the tripod high above the floor level. Mount the unit securely so there is no looseness. Looseness may cause the unit to fall off and/or result in injuries. When the unit is going to be used for a prolonged period of time, take steps to ensure that the unit will not topple or fall

over and that it will not fall off or fall down. After using the unit, restore the installation location to its original state without delay.

Notes

Page 19

Installation Instructions

Connections Connecting an NDI|HX compatible switcher

Supplied AC adaptor

AW-HE42 AW-HE42*

LAN cable

Switching hub

NDI|HX compatible switcher

Monitor Monitor

External DC power supply