Nespresso VertuoLine Evoluo My Machine User Manual
![Nespresso VertuoLine Evoluo My Machine manual cover](/images/46669984b1b0752507616daf/thumbs/thumb175x175.webp)
To descale your Nespresso VertuoLine Evoluo, first ensure the machine is turned on and the water tank is filled. Add a descaling solution to the tank. Place a container under the coffee outlet. Enter descaling mode by holding the button and lever for 3 seconds. Follow the instructions as the machine cycles through the descaling process.
If your machine is not brewing, check that the water tank is filled and properly positioned. Ensure the capsule is correctly inserted. Also, verify that the machine is not in descaling mode and that it is fully warmed up.
To reset the machine to factory settings, turn off the machine. Hold the button and lever simultaneously for 5 seconds until the LED blinks rapidly, indicating the reset is complete.
Ensure the machine is fully preheated before brewing. If the issue persists, descale the machine to improve performance. Additionally, pre-warm your cup with hot water to maintain coffee temperature.
Clean the exterior with a damp cloth. Rinse the water tank and capsule container regularly. Run a cleaning cycle without a capsule by pressing the button three times quickly.
Check if the water tank is properly secured and not cracked. Inspect the drip tray and capsule container for overflow. Ensure all seals and gaskets are intact and correctly positioned.
The machine automatically reads the barcode on each capsule to adjust the cup size. However, you can manually stop the coffee flow by pressing the button once when the desired amount is reached.
A blinking light typically indicates the machine is heating up or needs attention, such as refilling the water tank or emptying the capsule container. Refer to the manual for specific blinking patterns.
No, the Nespresso VertuoLine Evoluo is designed to work specifically with Nespresso Vertuo capsules due to the unique barcode system that adjusts brewing parameters.
Empty the water tank and capsule container. Clean and dry all removable parts. Store the machine in a cool, dry place away from direct sunlight.