Nespresso Delonghi Lattissima One My Machine User Manual
![Nespresso Delonghi Lattissima One My Machine manual cover](/images/e775840b2f7f1d4f7340eb9b/thumbs/thumb175x175.webp)
To descale your machine, fill the water tank with a descaling solution and water, place a container under the coffee outlet, and follow the descaling instructions in the user manual by pressing the appropriate buttons.
Ensure that the machine is properly plugged into a functioning power outlet, check for any tripped circuit breakers, and verify that the power button is pressed firmly.
Disassemble the milk frother components, rinse them with warm water, and use a mild detergent if necessary. Ensure all parts are completely dry before reassembling.
Preheat the cup with hot water, ensure the machine is fully warmed up before brewing, and verify that the temperature settings are correctly adjusted.
Check if the water tank is properly seated, inspect the drip tray for overflow, and examine the seals and gaskets for any damage.
Clean the machine’s exterior and removable parts after each use, and perform a deeper clean weekly. Descale the machine every 3 months or after 300 capsules.
Ensure you are using fresh capsules, verify that the water tank is filled to the appropriate level, and check that the brewing settings are correct.
Press and hold the espresso or lungo button until the desired amount of coffee is dispensed, then release the button to save the cup size setting.
Ensure that the milk container is filled to the correct level, the frother components are clean and assembled correctly, and the milk used is fresh and cold.
Turn on the machine, press and hold the lungo button until the LEDs blink three times, and then release the button to reset the machine to factory settings.