Nespresso Inissia C40 My Machine User Manual
![Nespresso Inissia C40 My Machine manual cover](/images/d42eddcb955ba9035a825943/thumbs/thumb175x175.webp)
To descale your Nespresso Inissia C40, fill the water tank with 500ml of water and add a descaling solution. Place a container under the coffee outlet, turn the machine on, and let it warm up. Press both the espresso and lungo buttons simultaneously for three seconds to start the descaling mode. Follow the on-screen instructions to complete the process.
If your Nespresso Inissia C40 is leaking water, check the water tank to ensure it is properly seated and not cracked. Inspect the drip tray for any overflow and ensure that the capsule container is correctly placed. If the issue persists, it may require service.
To reset your Nespresso Inissia C40 to factory settings, turn the machine off. Then, press and hold the lungo button while turning the machine on. Keep holding the button for five seconds until the lights blink three times to confirm the reset.
If your Nespresso Inissia C40 is not brewing coffee, check if the water tank is full and properly positioned. Ensure that the machine is warmed up and the capsule is correctly inserted. If the problem persists, try descaling the machine or consult the user manual for further troubleshooting.
You should clean the drip tray, capsule container, and water tank of your Nespresso Inissia C40 at least once a week. Descale the machine every three months or after approximately 300 capsules to maintain optimal performance.
Yes, you can adjust the cup size settings on the Nespresso Inissia C40. Press and hold the espresso or lungo button until the desired volume is reached, then release the button. The machine will remember this setting for future use.
For the best results, use clean, fresh water. While tap water is generally acceptable, using filtered or bottled water can help reduce mineral buildup and improve the taste of your coffee.
If the lights on your Nespresso Inissia C40 are blinking, it may indicate that the machine is in descaling mode or needs descaling. Follow the descaling instructions in the user manual. If the problem continues, try resetting the machine to factory settings.
Loud noises during operation can be caused by a misaligned water tank or trapped air bubbles. Ensure the water tank is properly seated and try running a water-only cycle to clear any air. If the noise persists, contact customer support.
While the Nespresso Inissia C40 is designed for Nespresso-branded capsules, some third-party capsules may also work. However, using non-Nespresso capsules may affect the machine's performance and could void any warranty coverage.