Contents

SAFETY PRECAUTIONS
CONDITIONS OF USE FOR THE PRODUCT
INTRODUCTION
CONTENTS
RELEVANT MANUALS
TERMS
1 FUNCTIONS
- 1.1 Control Mode Selection Function
- 1.2 Control Method
- 1.3 Sampling Cycle Switching Function
- 1.4 Control Output Cycle Unit Selection Function
- 1.5 HOLD/CLEAR Function
- 1.6 Overlap/dead Band Function
- 1.7 Manual Reset Function
- 1.8 Cooling Method Setting Function
- 1.9 Temperature Conversion Function (Using Unused Channels)
- 1.10 Manual Control
- 1.11 Auto Tuning Function
- 1.12 Self-tuning Function
- 1.13 Direct/reverse Action Selection Function
- 1.14 RFB Limiter Function
- 1.15 Derivative Action Selection Function
- 1.16 Simple Two-degree-of-freedom
- 1.17 Auto-setting at Input Range Change
- 1.18 Setting Variation Rate Limiter Setting Function
- 1.19 Sensor Correction Function
- 1.20 Primary Delay Digital Filter
- 1.21 Moving Average Processing
- 1.22 Scaling Function
- 1.23 ON Delay Output Function
- 1.24 Input/output (with Another Analog Module) Function
- 1.25 Alert Function
- 1.26 Rate Alarm Function
- 1.27 Heater Disconnection Detection Function
- 1.28 Output Off-time Current Error Detection Function
- 1.29 Loop Disconnection Detection Function
- 1.30 During AT Loop Disconnection Detection Function
- 1.31 Peak Current Suppression Function
- 1.32 Simultaneous Temperature Rise Function
- 1.33 Inter-module Link Function
  - Inter-module peak current suppression function
  - Inter-module simultaneous temperature rise function
- 1.34 Proportional Band Setting Function
- 1.35 Disturbance Suppression Function
- 1.36 Buffer Memory Data Backup Function
- 1.37 Overshoot Suppression Function
- 1.38 Error History Function
- 1.39 Event History Function
- 1.40 Interrupt Function
- 1.41 Q Compatible Mode Function
2 PARAMETER SETTING
- 2.1 Basic Setting
- 2.2 Application Setting
- 2.3 CT Setting
- 2.4 Interrupt Setting
- 2.5 Refresh Settings
  - Refresh processing time
3 TROUBLESHOOTING
- 3.1 Checks Using LEDs
  - When the RUN LED flashes or turns OFF
  - When the ERR LED turns ON
  - When the ALM LED turns ON or flashes
  - When the HBA LED turns ON
- 3.2 Checking the Module Status
- 3.3 Troubleshooting by Symptom
- 3.4 List of Error Codes
- 3.5 List of Alarm Codes
APPENDICES
- Appendix 1 Module Label
- Appendix 2 I/O Signal
  - List of I/O signals
  - Details of input signals
  - Details of output signals
- Appendix 3 Buffer Memory Areas
  - List of buffer memory addresses
  - Details of buffer memory addresses
- Appendix 4 PID
  - PID control
  - PID operation
  - Actions of the temperature control module
  - Proportional action (P action)
  - Integral action (I action)
  - Derivative action (D action)
  - PID action
- Appendix 5 Operation Examples of When the Remote Head Module Is Mounted
  - System configuration example
  - Setting in the master station
  - Setting in the intelligent device station
  - Checking the network status
  - Program examples
- Appendix 6 Restrictions for When the Remote Head Module Is Mounted
- Appendix 7 Using the Module in the Redundant System with Redundant Extension Base Unit
  - Restricted functions and specifications
  - Precautions
- Appendix 8 Added or Enhanced Function
INDEX
REVISIONS
WARRANTY
TRADEMARKS

Mitsubishi Electric R60TCTRT2TT2 R60TCTRT2TT2BW Users Manual v2

Mitsubishi Electric R60TCTRT2TT2 R60TCTRT2TT2BW manual cover

Pages 368

Year 2015

Language(s)

of 368

Mitsubishi Electric R60TCTRT2TT2 R60TCTRT2TT2BW Specification

The Mitsubishi Electric R60TCTRT2TT2 and R60TCTRT2TT2BW are advanced HVAC control systems designed for precise climate management in commercial and residential settings. These models integrate state-of-the-art technology to ensure optimal energy efficiency and user convenience. Both units feature a robust microprocessor that enables seamless communication with Mitsubishi Electric's suite of HVAC products, allowing for sophisticated control and monitoring of temperature, humidity, and air quality.

The R60TCTRT2TT2 series boasts compatibility with a wide range of sensors and actuators, providing extensive customization options. This allows users to tailor the system to specific environmental requirements, enhancing comfort and operational efficiency. The R60TCTRT2TT2BW variant offers additional features, including wireless connectivity for remote access and control via smart devices, facilitating real-time adjustments and monitoring from anywhere. This connectivity is secured with advanced encryption protocols to protect user data and system integrity.

Both models are equipped with an intuitive user interface, designed for ease of use and quick access to system settings. The interface supports multi-language options and provides detailed system diagnostics and alerts to ensure timely maintenance and troubleshooting. Energy-saving algorithms are embedded within the control logic, automatically optimizing system performance to reduce operational costs and environmental impact. The R60TCTRT2TT2 and R60TCTRT2TT2BW are engineered to integrate with building management systems, offering scalability and flexibility for large-scale installations. These models represent Mitsubishi Electric's commitment to innovation, quality, and sustainability in climate control solutions.

Mitsubishi Electric R60TCTRT2TT2 R60TCTRT2TT2BW F.A.Q.

How do I perform a factory reset on the Mitsubishi Electric R60TCTRT2TT2?

To perform a factory reset, locate the reset button on the unit. Press and hold the reset button for 10 seconds until the LED indicators flash, indicating the reset process has started. Release the button and wait for the unit to reboot.

What is the recommended maintenance schedule for the Mitsubishi Electric R60TCTRT2TT2BW?

Regular maintenance should be performed every 6 months. This includes cleaning filters, checking refrigerant levels, and inspecting the electrical connections. For detailed instructions, refer to the maintenance section in the user manual.

How can I troubleshoot if the unit is not cooling effectively?

First, ensure that the air filters are clean and not blocked. Check if the thermostat is set to the correct temperature. Inspect the outdoor unit for any obstructions and ensure it is free from debris. If the issue persists, consult a professional technician.

What should I do if there is water leaking from the indoor unit?

Water leakage can be caused by a clogged drain line. Check if the drain pipe is blocked and clear any obstructions. Also, ensure that the unit is properly leveled. If the problem continues, seek assistance from a qualified technician.

Can I control the Mitsubishi Electric R60TCTRT2TT2 remotely?

Yes, the unit supports remote control operation. You can use the dedicated remote control that comes with the unit or integrate it with a compatible smart home system for advanced remote management.

How do I replace the air filter in the Mitsubishi Electric R60TCTRT2TT2BW?

To replace the air filter, first turn off the power to the unit. Open the front panel and remove the old filter. Insert the new filter, ensuring it fits securely. Close the panel and restore power. Refer to the manual for filter specifications and replacement guidelines.

Why is my Mitsubishi Electric R60TCTRT2TT2 making unusual noises?

Unusual noises can result from loose components or debris in the fan. Inspect the unit for any loose screws or foreign objects. Tighten any loose parts and clear debris. If noises persist, contact a professional for further inspection.

What type of refrigerant is used in the Mitsubishi Electric R60TCTRT2TT2?

The Mitsubishi Electric R60TCTRT2TT2 typically uses R410A refrigerant. Always refer to the unit's specifications to confirm the refrigerant type and ensure any servicing is performed by a licensed technician.

How can I increase the energy efficiency of my Mitsubishi Electric R60TCTRT2TT2BW?

To increase energy efficiency, ensure regular maintenance is performed. Keep air filters clean, seal any air leaks in the room, and use programmable settings to optimize operation times. Lowering the thermostat slightly in winter and raising it in summer can also help.

What should I do if the remote control is not working with the Mitsubishi Electric R60TCTRT2TT2?

First, check the batteries in the remote control and replace them if necessary. Ensure there are no obstructions between the remote and the unit. If the remote still does not work, try resetting it by removing the batteries and pressing all buttons for 5 seconds. If the problem persists, consult the user manual or contact support.