Contents

SAFETY PRECAUTIONS
CONDITIONS OF USE FOR THE PRODUCT
INTRODUCTION
CONTENTS
RELEVANT MANUALS
TERMS
GENERIC TERMS AND ABBREVIATIONS
MANUAL PAGE ORGANIZATION
1 FUNCTIONS
- 1.1 Modes
- 1.2 Range Switching Function
- 1.3 D/A Conversion Enable/Disable Setting Function
- 1.4 D/A Output Enable/Disable Setting Function
- 1.5 Analog Output HOLD/CLEAR Function
- 1.6 Analog Output Test Function When the CPU Module is in STOP State
- 1.7 Scaling Function
- 1.8 Shift Function
- 1.9 Warning Output Function
- 1.10 Rate Control Function
- 1.11 External Power Supply Interruption Detection Function
- 1.12 Disconnection Detection Function
- 1.13 Interrupt Function
- 1.14 Wave Output Function
  - Initial settings of the wave output function
  - Execution of the wave output function
  - Points to use the wave output function
  - Wave output step action function
- 1.15 Inter-Module Synchronization Function
- 1.16 Error History Function
- 1.17 Event History Function
- 1.18 Backing up, Saving, and Restoring Offset/Gain Values
  - When the module-specific backup parameter is used
  - When the module-specific backup parameter is not used
2 PARAMETER
- 2.1 Parameter Setting Procedure
- 2.2 Basic Setting
- 2.3 Application Setting
- 2.4 Interrupt Setting
- 2.5 Refresh Setting
  - Refresh processing time
3 TROUBLESHOOTING
- 3.1 Troubleshooting with LEDs
- 3.2 Checking State of Module
- 3.3 Troubleshooting by Symptom
  - When the RUN LED flashes or turns off
  - When the ERR LED turns on
  - When the ALM LED turns on
  - When the analog output is not performed
  - When HOLD of an analog output value is not available
  - When the analog output is not performed in the wave output mode
  - When analog output stops during wave output
  - When synchronous output is not started
- 3.4 List of Error Codes
- 3.5 List of Alarm Codes
APPENDICES
- Appendix 1 Module Label
- Appendix 2 I/O Signals
  - List of I/O signals
  - Details of input signals
  - Details of output signals
- Appendix 3 Buffer Memory Areas
  - List of buffer memory areas
  - Details of buffer memory areas
- Appendix 4 Dedicated Instructions
  - Instruction list
- Appendix 5 Operation Examples of When the Remote Head Module Is Mounted
  - System configuration example
  - Settings in the master station
  - Settings in the intelligent device station
  - Checking the network status
  - Program examples
- Appendix 6 Using the Module in the Redundant System with Redundant Extension Base Unit
  - Restrictions on functions and specifications
  - Precautions
INDEX
REVISIONS
WARRANTY
TRADEMARKS

Mitsubishi Electric R60DAH4 User's Manual

Mitsubishi Electric R60DAH4 manual cover

Pages 210

Year 2016

Language(s)

of 210

Mitsubishi Electric R60DAH4 Specification

The Mitsubishi Electric R60DAH4 is a sophisticated air conditioning unit designed for efficient climate control in both residential and commercial spaces. This model showcases advanced inverter technology, which optimizes energy consumption by adjusting the compressor speed to match the cooling or heating demand. This results in significant energy savings and reduced operational costs over time. The R60DAH4 operates with a high coefficient of performance (COP), highlighting its efficiency in converting electrical energy into heating or cooling power. This unit features a compact design, facilitating easy installation and maintenance, and is constructed with durable materials to ensure longevity and reliability. The system includes a responsive control interface, allowing for precise temperature adjustments and integration with smart home systems for enhanced user convenience. It also employs a sophisticated filtration system that improves indoor air quality by capturing dust, allergens, and other airborne particles. The Mitsubishi Electric R60DAH4 operates with minimal noise levels, promoting a quiet and comfortable environment. Additionally, it supports eco-friendly refrigerants, aligning with environmental standards and reducing its ecological footprint. This model is engineered to perform optimally in various climate conditions, providing consistent comfort throughout the year. Overall, the Mitsubishi Electric R60DAH4 represents a blend of cutting-edge technology and user-centric design, making it a reliable choice for modern climate control needs.

Mitsubishi Electric R60DAH4 F.A.Q.

How do I perform a basic reset on the Mitsubishi Electric R60DAH4?

To perform a basic reset, turn off the unit using the power button, disconnect it from the power source for about 5 minutes, and then reconnect and power it back on. This resets the internal system.

What should I do if the R60DAH4 is not cooling effectively?

Check the air filters for any blockages and clean them if necessary. Ensure that the thermostat is set to the correct temperature, and verify that all windows and doors are closed properly to maintain efficiency.

How often should I clean the filters on my R60DAH4 unit?

It is recommended to clean the air filters every two weeks under normal conditions. In more dusty environments, consider cleaning them weekly for optimal performance.

What maintenance steps should I follow for the R60DAH4 before the summer season?

Before summer, ensure that the unit's filters and coils are clean, check the refrigerant levels, inspect the outdoor unit for debris, and test the system's functionality.

How can I troubleshoot if the R60DAH4 is making unusual noises?

Unusual noises can be due to loose parts or debris. Inspect the unit for any loose screws or panels, and ensure that there are no obstructions in the fan or vents. If the noise persists, contact a professional technician.

Can I operate the R60DAH4 remotely, and if so, how?

Yes, the R60DAH4 can be operated remotely using the Mitsubishi Electric mobile app. Ensure your unit is connected to Wi-Fi, and follow the app setup instructions to control your system remotely.

What should I do if the unit is leaking water inside the house?

Water leakage can be due to a clogged condensate drain. Check the drain line for blockages and clean it if necessary. Ensure the unit is properly leveled to allow proper drainage.

How can I improve the energy efficiency of my R60DAH4 unit?

To improve energy efficiency, regularly clean or replace air filters, ensure proper insulation in your home, use programmable settings to adjust temperatures, and schedule regular maintenance checks.

What is the recommended temperature setting for the R60DAH4 during the winter?

During winter, it is recommended to set the thermostat between 68°F to 72°F for optimal comfort and energy efficiency. Adjust according to personal comfort preferences.

Is there a way to lock the settings on the R60DAH4 to prevent unauthorized changes?

Yes, the R60DAH4 has a child lock feature. Access the settings menu on the remote control or app, and activate the lock function to prevent unintended adjustments.