Contents

COPYRIGHT
PRECAUTIONS REGARDING WARRANTY
SAFETY PRECAUTIONS
CONDITIONS OF USE FOR THE PRODUCT
COMPLIANCE WITH EMC AND LOW VOLTAGE DIRECTIVES
CONTENTS
TERMS
CHAPTER 1 OVERVIEW
CHAPTER 2 SPECIFICATIONS
- 2.1 General Specifications
- 2.2 Performance Specifications
  - 2.2.1 Performance specifications
  - 2.2.2 Scope of the power supply for the transmission cable
  - 2.2.3 Power supply sequence and handling of I/O data
- 2.3 Applicable System
  - 2.3.1 Applicable master module
  - 2.3.2 Differences in parameter settings depending on the CC-Link versions
  - 2.3.3 CC-Link dedicated instruction
- 2.4 External Dimensions
- 2.5 Part Names
- 2.6 Checking Function Version and Serial Number
CHAPTER 3 MODULE MOUNTING
CHAPTER 4 CONNECTIONS
- 4.1 CC-Link Side Terminal Block
  - 4.1.1 Connecting a CC-Link dedicated cable
  - 4.1.2 Cable processing
- 4.2 AnyWire Bitty Side Terminal Block
  - 4.2.1 Description of the terminals of an AnyWire Bitty side terminal block
  - 4.2.2 Cable processing
- 4.3 Terminating Unit
CHAPTER 5 SWITCH SETTING
- 5.1 CC-Link Side
- 5.2 AnyWire Bitty Side
CHAPTER 6 MEMORY MAPS
- 6.1 Remote I/O Signal List
- 6.2 Remote Register List
- 6.3 Correspondence Between the Remote Register and Address
- 6.4 Error Reset
CHAPTER 7 PREPARATION FOR OPERATION
- 7.1 Setting by the Parameter
- 7.2 Setting on the Program
CHAPTER 8 POWER-ON AND PART INDICATION
- 8.1 LED Indication Specification
CHAPTER 9 MONITORING FUNCTION
- 9.1 Automatic Address Detection
  - 9.1.1 Performing the automatic address detection
- 9.2 Monitoring Operation
CHAPTER 10 CC-LINK I/O RESPONSE TIME
CHAPTER 11 TRANSMISSION TIME
- 11.1 Transmission Cycle Time
  - 11.1.1 Transmission cycle time of the NZ2AW1C1BY
  - 11.1.2 Effects of the double check system
- 11.2 Transmission Delay Time
  - 11.2.1 Slave module (input) to bridge module
  - 11.2.2 Bridge module to slave module (output)
CHAPTER 12 TROUBLESHOOTING
- 12.1 Troubleshooting Flow
  - 12.1.1 When transmission does not start
  - 12.1.2 When the ERR.LED on the CC-Link master station is flashing
  - 12.1.3 When the LINK LED on the bridge module does not flash
  - 12.1.4 When the LINK LED on the slave module does not flash
  - 12.1.5 When the slave module does not operate as expected
- 12.2 Symptom checklist
APPENDICES
- Appendix 1 EMC and Low Voltage Directives
  - Appendix 1.1 Requirements for compliance with the EMC Directive
  - Appendix 1.2 Requirements for compliance with the Low Voltage Directive
- Appendix 2 Functions Added and Modified with Version Upgrade
REVISIONS
WARRANTY
TRADEMARKS

Mitsubishi Electric NZ2AW1C1BY User's Manual

Mitsubishi Electric NZ2AW1C1BY manual cover

Pages 74

Year 2011

Language(s)

of 74

Mitsubishi Electric NZ2AW1C1BY Specification

The Mitsubishi Electric NZ2AW1C1BY is an advanced industrial automation module known for its robust performance in factory automation settings. Designed to seamlessly integrate with Mitsubishi's iQ Platform, this module facilitates high-speed and high-precision control within complex automation systems. It features a compact design that ensures space-efficient installation, making it suitable for a variety of industrial environments. The NZ2AW1C1BY supports Ethernet connectivity, enabling efficient communication and data exchange with other networked devices and systems. This connectivity is crucial for real-time monitoring and control, enhancing operational efficiency and productivity.

The module is engineered with advanced diagnostic capabilities that allow for quick identification and resolution of operational issues, minimizing downtime and maintenance costs. Its design incorporates high noise immunity, ensuring reliable performance even in electrically noisy environments. The NZ2AW1C1BY is also compliant with international safety standards, providing a secure and reliable solution for automation tasks.

In terms of power management, the module is optimized for energy efficiency, contributing to reduced operational costs and environmental impact. Its firmware can be updated to incorporate the latest features and improvements, ensuring long-term viability and adaptability to evolving industrial needs. This device is an ideal choice for industries looking to enhance their automation capabilities with a reliable, efficient, and technologically advanced solution.

Mitsubishi Electric NZ2AW1C1BY F.A.Q.

How do I install the Mitsubishi Electric NZ2AW1C1BY module?

To install the Mitsubishi Electric NZ2AW1C1BY module, ensure the power is off before mounting it onto the DIN rail. Connect the module to the main PLC system via the designated communication cables, and secure all connections to prevent dislodging. Refer to the user manual for detailed installation steps.

What should I do if the NZ2AW1C1BY module is not communicating with the PLC?

If the module is not communicating, first check all cable connections for tightness and integrity. Verify that the module is properly powered and that the communication settings match those of the PLC. Consult the troubleshooting section of the manual for further guidance.

How can I reset the NZ2AW1C1BY module to factory settings?

To reset the NZ2AW1C1BY module to factory settings, locate the reset button on the module. Press and hold the button for 10 seconds until the status LED blinks, indicating a successful reset. Refer to the user manual for specifics.

What are the regular maintenance tasks for the NZ2AW1C1BY module?

Regular maintenance for the NZ2AW1C1BY includes checking for firmware updates, inspecting connections for wear or corrosion, and ensuring that the module's operating environment remains within specified temperature and humidity ranges.

How do I update the firmware on the NZ2AW1C1BY module?

To update the firmware, download the latest firmware version from Mitsubishi Electric's official website. Connect the module to your computer via USB and use the provided software tool to upload the firmware, following on-screen instructions.

What should I check if the NZ2AW1C1BY module is overheating?

Ensure that the module is not operating beyond the recommended temperature range. Check for obstructions to airflow around the module and verify that the installation site is well-ventilated. Consider adding cooling mechanisms if overheating persists.

Can the NZ2AW1C1BY module be used with third-party PLCs?

The NZ2AW1C1BY module is primarily designed for compatibility with Mitsubishi Electric PLCs. To use it with third-party PLCs, ensure that the communication protocols are compatible and perform thorough testing before deployment.

How do I perform a diagnostic test on the NZ2AW1C1BY module?

Utilize the diagnostic tools available within the Mitsubishi Electric software suite. Connect the module to your computer and run the diagnostic tests to identify any issues related to performance or connectivity.

What is the recommended operating temperature range for the NZ2AW1C1BY module?

The recommended operating temperature range for the NZ2AW1C1BY module is typically between 0°C and 55°C (32°F to 131°F). Ensure the module environment adheres to these conditions to maintain optimal performance.

How can I extend the lifespan of the NZ2AW1C1BY module?

To extend the lifespan of the module, follow regular maintenance procedures, ensure proper installation, avoid exposure to extreme environmental conditions, and promptly address any operational anomalies.