User's Manual
GT16-90PSCB-012 GT16-80PSCB-012 GT16-70PSCB-012 GT16-60PSCB-012 GT16-50PSCB-012
Thank you for choosing Mitsubishi Electric Graphic Operation Terminal (GOT).
2010 MITSUBISHI ELECTRIC CORPORATION
GT16 Protective Sheet (Covered USB Environmental
Protection Cover Type)
Prior to use, please read both this manual and detailed manual thoroughly to fully understand the product.
MODEL GT16-SP-S-U
MODEL CODE
1D7MD8
IB(NA)-0800468-D(1806)MEE
SAFETY PRECAUTIONS (Always read these precautions before using this equipment.)
Before using this product, please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly. The precautions given in this manual are concerned with this prod- uct. In this manual, the safety precautions are ranked as "WARNING" and "CAUTION".
Note that the CAUTION level may lead to a serious accident according to the circumstances. Always follow the precautions of both levels because they are import- ant to personal safety. Please save this manual to make it accessible when required and always forward it to the end user.
Indicates that incorrect handling may cause hazardous conditions, resulting in death or severe injury.
Indicates that incorrect handling may cause hazardous conditions, resulting in medium or slight personal injury or physical damage.
WARNING
CAUTION
[INSTALLATION PRECAUTIONS]
[STARTUP AND MAINTENANCE PRECAUTIONS]
[DISPOSAL PRECAUTIONS]
Manuals
The following shows manuals relevant to this product.
For relevant manuals, refer to the PDF manuals stored in the CDROM for the drawing software used.
Referenced Standard: GB/T15969.2 (Requirement of Chinese standardized law)
Packing List After unpacking the box, check that the following products are included.
When attaching the protective sheet onto the GOT display section, make sure to fit the protective sheet onto the section closely without leaving any air between them. Failure to do so may cause a malfunction
After attaching the protective sheet, remove the protective film. When the user continues using the GOT with the protective film, the film may not be removed.
Daily check the protective sheet with eyes. When you find extreme dirt or scratches on the surface, immediately replace it with new one. Using the productive sheet of decreased visibility may cause a malfunction.
Dispose of this product as industrial waste.
Detailed Manual
Manual name Manual number
(Model code)
GT16 User's Manual (Hardware) (Sold separately)
SH-080928ENG (1D7MD3)
Relevant Manuals
Model Product Quantity
GT16-90PSCB-012 GT16-80PSCB-012 GT16-70PSCB-012 GT16-60PSCB-012 GT16-50PSCB-012
Protective sheet 5
CAUTION
CAUTION
CAUTION
1. OVERVIEW
This User's Manual describes GT16 protective sheet (Covered USB environmental protection cover type) (hereinafter referred to as the protective sheet). The following protective sheets are available. For the applicable GOTs, refer to GT16 User's Manual (Hardware).
Use the protective sheet to protect the display section surface from scratches and dirt when operating the touch keys on the GOT display section.
2. PART NAMES AND EXTERNAL DIMENSIONS
Unit: mm (inch)
Product Model Description
Protective sheet
GT16-90PSCB-012 15" protective sheet Clear
GT16-80PSCB-012 12.1" protective sheet Clear
GT16-70PSCB-012 10.4" protective sheet Clear
GT16-60PSCB-012 8.4" protective sheet Clear
GT16-50PSCB-012 5.7" protective sheet Clear
Item A B
15" protective sheet 391 (15.4) 290 (11.4)
12.1" protective sheet 310 (12.2) 236 (9.3)
10.4" protective sheet 297(11.7) 208 (8.2)
8.4" protective sheet 235(9.3) 184(7.3)
5.7" protective sheet 163(6.4) 131(5.2)
A
Remove the sheet's Protective Film.
B
3. INSTALLATION PROCEDURE
1) If the old protective sheet is attached, remove the sheet from the lower right of the GOT, and clean the GOT surface. (Peel off the sheet slowly.)
2) Peel the release paper off the back of the new protective sheet. With the protective film left on the sheet surface, attach the sheet so that the POWER LED hole is just on the POWER LED of the GOT.
3) When attaching the protective sheet, make sure to fit the sheet on the GOT without leaving any clearance between the sheet and the GOT.
4) Remove the protective film from the protective sheet. When the user continues using the GOT with the protective film, the film may not be removed.
Warranty Mitsubishi Electric will not be held liable for damage caused by factors found not to be the cause of Mitsubishi Electric; machine damage or lost profits caused by faults in the Mitsubishi Electric products; damage, secondary damage, accident compensation caused by special factors unpredictable by Mitsubishi Electric; damages to products other than Mitsubishi Electric products; and to other duties.
For safe use This product has been manufactured as a general-purpose part for
general industries, and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life.
Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger movement vehicles, consult with Mitsubishi Electric.
This product has been manufactured under strict quality control. However, when installing the product where major accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system
USA
Brazil
Mexico
Germany
UK
Italy
Spain
France
Czech
Turkey
Poland
Russia
South Africa
China
Taiwan
Korea
Singapore
Thailand
Indonesia
Vietnam
India
Australia
Country/Region Sales office/Tel
Mitsubishi Electric Automation, Inc. 500 Corporate Woods Parkway, Vernon Hills, IL 60061, U.S.A. Tel: +1-847-478-2100 Mitsubishi Electric do Brasil Comercio e Servicos Ltda. Avenida Adelino Cardana, 293, 21 andar, Bethaville, Barueri SP, Brasil CEP 06401-147 Tel: +55-11-4689-3000 Mitsubishi Electric Automation, Inc. Mexico Branch Mariano Escobedo #69, Col. Zona Industrial, Tlalnepantla Edo. Mexico, C.P.54030 Tel: +52-55-3067-7511 Mitsubishi Electric Europe B.V. German Branch Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany Tel: +49-2102-486-0 Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Hertfordshire, AL10 8XB, U.K. Tel: +44-1707-28-8780 Mitsubishi Electric Europe B.V. Italian Branch Centro Direzionale Colleoni - Palazzo Sirio, Viale Colleoni 7, Agrate Brianza (MB), Italy Tel: +39-039-60531 Mitsubishi Electric Europe B.V. Spanish Branch Carretera de Rubi 76-80-Apdo.420, 08190 Sant Cugat del Valles (Barcelona), Spain Tel: +34-935-65-3131 Mitsubishi Electric Europe B.V. French Branch 25, Boulevard des Bouvets, 92741 Nanterre Cedex, France Tel: +33-1-55-68-55-68 Mitsubishi Electric Europe B.V. Czech Branch Avenir Business Park, Radlicka 751/113e, 158 00 Praha 5, Czech Republic Tel: +420-251-551-470 Mitsubishi Electric Turkey A.S. Umraniye Branch Serifali Mahallesi Nutuk Sokak No:5, TR-34775 Umraniye / Istanbul, Turkey Tel: +90-216-526-3990 Mitsubishi Electric Europe B.V. Polish Branch ul. Krakowska 50, 32-083 Balice, Poland Tel: +48-12-347-65-00 Mitsubishi Electric (Russia) LLC St. Petersburg Branch Piskarevsky pr. 2, bld 2, lit Sch, BC Benua, office 720; RU-195027 St. Petersburg, Russia Tel: +7-812-633-3497 Adroit Technologies 20 Waterford Office Park, 189 Witkoppen Road, Fourways, Johannesburg, South Africa Tel: +27-11-658-8100 Mitsubishi Electric Automation (China) Ltd. No.1386 Hongqiao Road, Mitsubishi Electric Automation Center, Shanghai, China Tel: +86-21-2322-3030 SETSUYO ENTERPRISE CO., LTD. 6F, No.105, Wugong 3rd Road, Wugu District, New Taipei City 24889, Taiwan Tel: +886-2-2299-2499 Mitsubishi Electric Automation Korea Co., Ltd. 7F-9F, Gangseo Hangang Xi-tower A, 401, Yangcheon-ro, Gangseo-Gu, Seoul 07528, Korea Tel: +82-2-3660-9530 Mitsubishi Electric Asia Pte. Ltd. 307 Alexandra Road, Mitsubishi Electric Building, Singapore 159943 Tel: +65-6473-2308 Mitsubishi Electric Factory Automation (Thailand) Co., Ltd. 12th Floor, SV.City Building, Office Tower 1, No. 896/19 and 20 Rama 3 Road, Kwaeng Bangpongpang, Khet Yannawa, Bangkok 10120, Thailand Tel: +66-2682-6522 to 31 PT. Mitsubishi Electric Indonesia Gedung Jaya 11th Floor, JL. MH. Thamrin No.12, Jakarta Pusat 10340, Indonesia Tel: +62-21-3192-6461 Mitsubishi Electric Vietnam Co., LTD. Ho Chi Minh Head Office Unit 01-04, 10th Floor, Vincom Center, 72 Le Thanh Ton Street, District 1, Ho Chi Minh City, Vietnam Tel: +84-8-3910-5945 Mitsubishi Electric India Pvt. Ltd. Pune Branch Emerald House, EL -3, J Block, M.I.D.C., Bhosari, Pune - 411026, Maharashtra, India Tel: +91-20-2710-2000 Mitsubishi Electric Australia Pty. Ltd. 348 Victoria Road, P.O. Box 11, Rydalmere, N.S.W. 2116, Australia Tel: +61-2-9684-7777
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN NAGOYA
en
en