McCulloch MiniTrim Auto Plus 23 Original Instructions

To start the trimmer, ensure the on/off switch is in the 'on' position, press the primer bulb several times until fuel is visible, pull the choke lever to the start position, and pull the starter rope briskly.
Use a mixture of unleaded gasoline and high-quality 2-cycle engine oil at a 40:1 ratio. Mix thoroughly before filling the fuel tank.
Turn off the trimmer and disconnect the spark plug. Remove the spool cap, take out the old line, and thread a new line through the holes in the spool. Wind the line evenly in the direction indicated on the spool. Reattach the spool cap securely.
Ensure you are using the correct line diameter specified in the manual. Avoid striking hard surfaces and trim at recommended angles to reduce line breakage.
Check the fuel mixture, inspect the spark plug for wear or damage, ensure the air filter is clean, and verify that the choke is used correctly. Replace any faulty components as necessary.
Check the trimmer line for wear or damage, ensure it is the correct length, and inspect the cutting head for obstructions. Replace the line or clean the head as needed.
Perform regular maintenance, including cleaning the air filter, checking the spark plug, and inspecting the fuel filter, after every 25 hours of use or at least once a year.
Wear protective eyewear, gloves, and sturdy shoes. Keep bystanders at a safe distance and avoid using the trimmer near flammable materials. Follow all safety instructions in the manual.
The McCulloch MiniTrim Auto Plus 23 is designed for use with its specific trimmer head and line. Using unauthorized attachments may cause damage or injury.
Empty the fuel tank and run the engine until it stops. Clean the trimmer thoroughly, inspect for damage, and store it in a dry, secure location away from direct sunlight or moisture.