Logik LWKBOM10 Quick Start Guide
![Logik LWKBOM10 manual cover](/images/RlJTUkcjyQHUXpnyCrrcECmz/thumbs/thumb175x175.webp)
To connect the Logik LWKBOM10 Keyboard-Mouse Combo to your computer, plug the USB receiver into an available USB port. The keyboard and mouse should automatically pair with the receiver.
If the keyboard or mouse is not responding, try the following steps: ensure the USB receiver is properly connected, replace the batteries in the keyboard and mouse, and move any potential sources of interference away from the receiver.
To clean the keyboard and mouse, disconnect the USB receiver and remove the batteries. Use a soft, slightly damp cloth to wipe the surfaces. Avoid using harsh chemicals or submerging the devices in water.
The expected battery life for the Logik LWKBOM10 keyboard and mouse is several months under typical usage conditions. Battery life may vary based on usage patterns and the quality of the batteries used.
To replace the batteries, open the battery compartment on the underside of the keyboard or mouse. Insert the new batteries, ensuring the correct polarity, and close the compartment securely.
Yes, the Logik LWKBOM10 keyboard and mouse can be used with a Mac. Simply connect the USB receiver to an available USB port on your Mac. No additional drivers are required.
If the keys are sticking or not registering, try cleaning the keyboard by removing any debris under the keys. Gently tap the keyboard upside down or use compressed air to dislodge particles.
The Logik LWKBOM10 mouse features a DPI adjustment button, usually located near the scroll wheel. Press this button to cycle through the available DPI settings for different cursor speeds.
If the mouse cursor is jumping, try using the mouse on a different surface or mouse pad. Ensure the optical sensor is clean and free from dust or smudges.
Yes, you can use the keyboard and mouse independently. Each device communicates with the USB receiver separately, so you can use either the keyboard or mouse as needed.