LG WT901CF WT901CF.ASFEMUS Owner's Manual
![LG WT901CF WT901CF.ASFEMUS Washing Machine manual cover](/images/eKaZBmGjUdRHaAnhLbzMXNwX/thumbs/thumb175x175.webp)
To reset the LG WT901CF washing machine, unplug the machine from the power outlet, wait for about 5 minutes, and then plug it back in. This can help reset the electronics and clear any minor errors.
If the washing machine is not draining, check the drain hose for any kinks or blockages. Make sure the hose is installed correctly. Additionally, inspect the drain pump filter for any debris or obstructions.
To clean the detergent dispenser, remove it from the machine and rinse it under warm water. Use a soft brush to remove any residue. Ensure all compartments are free from detergent buildup before reassembling.
Excessive vibration can be caused by an unbalanced load. Ensure the laundry is evenly distributed in the drum. Additionally, check that the machine is level and adjust the feet if necessary.
Regular maintenance includes cleaning the drum, detergent dispenser, and door seal. Check the hoses for wear and replace them if necessary. Perform a tub clean cycle monthly to prevent buildup.
To use the delay wash feature, select your desired cycle, then press the delay wash button. Use the control panel to set the desired delay time, and press start to activate the feature.
If the door does not open, ensure the cycle has fully completed and the machine is not in a locked state. If needed, perform a manual unlock by unplugging the machine and waiting a few minutes before trying again.
Error code OE indicates a drainage issue. Check the drain hose and pump filter for clogs. Ensure the drain hose is not pinched or kinked and that the standpipe is not blocked.
Use the delicate or gentle cycle when washing delicate fabrics. It is also advisable to use a mesh laundry bag and a mild detergent to protect the fabrics during the wash.
If the machine does not start, ensure that the door is closed properly and latched. Check the power connection and circuit breaker. Also, verify that the child lock feature is not activated.