LG WM5005HKA WM5005HKA.ABSEEUS Owner's Manual

To properly load laundry, distribute clothes evenly around the drum, avoid overloading, and ensure no items are caught in the door. Use the appropriate cycle for the fabric type.
Check if the machine is plugged in, the door is fully closed, and the water supply is turned on. Ensure the cycle is selected and the Start button is pressed.
Remove the dispenser drawer by pulling it out, then rinse it under warm water to remove detergent residue. Use a soft brush for any stubborn buildup.
Regularly clean the drum, door seal, and detergent drawer. Run the Tub Clean cycle monthly and ensure the machine is level to prevent vibrations.
Ensure the washing machine is level using a spirit level. Adjust the leveling feet if necessary, and make sure the load is balanced evenly inside the drum.
Check hoses for tight connections and inspect for cracks. Ensure the door seal is clean and undamaged. Replace faulty components if necessary.
To perform a factory reset, unplug the washing machine for at least 5 minutes, then plug it back in. Refer to the manual for specific reset instructions if needed.
The OE error code indicates a drainage issue. Check the drain hose for kinks or clogs, and clean the pump filter. Restart the cycle to see if the issue persists.
Leave the door and detergent drawer open after each wash to allow air circulation. Regularly clean the door seal and use the Tub Clean cycle to remove residues.
Ensure the detergent drawer is clean and not clogged. Check that you are using the correct type and amount of detergent. Verify that the water pressure is sufficient.