LG WM3488HW WM3488HW.ABWEEUS Owner's Manual V2
![LG WM3488HW WM3488HW.ABWEEUS Washing Machine manual cover](/images/BrFeofnnunYCxpLCvQBSWVYt/thumbs/thumb175x175.webp)
To perform a tub clean cycle, add a washing machine tub cleaner or liquid chlorine bleach to the detergent dispenser. Close the door and select the 'Tub Clean' cycle. Press 'Start' to begin the cleaning cycle.
Ensure the drain hose is not kinked or clogged. Check the drain pump filter for any debris. It's located at the bottom right corner behind the access panel. Clean it and restart the machine.
Ensure the machine is level by adjusting the feet. Avoid overloading the washer, and distribute clothes evenly. Use the correct cycle for the type of laundry being washed.
The 'OE' error code indicates a drainage issue. Check the drain hose and pump filter for blockages. Make sure the drain hose is installed correctly and at the right height.
Remove the dispenser drawer by pressing down on the disengage button. Wash each compartment under warm water to remove residue. Reinsert the drawer after it is completely dry.
The 'LE' error indicates a motor issue, often from overloading. Remove some items and restart the cycle. If the error persists, unplug the machine for 30 minutes to reset it.
Regularly clean the drum and gasket, check the detergent dispenser for buildup, and inspect the hoses for leaks or wear. Perform a tub clean cycle monthly.
Leave the door slightly open after each wash to allow the interior to dry. Wipe the gasket dry after use, and regularly run the tub clean cycle with a suitable cleaner.
Ensure the power cord is plugged in and the circuit breaker is not tripped. Check if the door is closed properly and the 'Start' button is pressed. Verify that the child lock is not activated.
Select your desired wash cycle, then press the 'Temp' button to cycle through available temperature options: Cold, Warm, and Hot. Choose the appropriate setting for your laundry needs.