LG WM1388HW WM1388HW.ABWEEUS Owner's Manual

To perform a tub clean cycle, press the 'Power' button, then select 'Tub Clean' on the control panel. Ensure the drum is empty, then press 'Start'. This cycle helps maintain the cleanliness of the drum.
Check the drain pump filter for blockages by opening the filter access cover at the bottom front of the washer. Clean the filter and ensure the drain hose is not kinked or clogged.
Ensure the washing machine is level by adjusting the feet. You can also try redistributing the laundry load and ensuring the machine is on a solid, even surface.
Remove the dispenser tray by pulling it out completely and pressing the release button. Wash it under running water to remove detergent residue, then dry and reinsert it.
Ensure the door is fully closed and latched. Check if the washer is properly plugged in and the circuit breaker is not tripped. Also, verify that a cycle has been selected.
Leave the door slightly open after each wash to allow air circulation. Regularly use the 'Tub Clean' cycle and avoid using excessive detergent.
Refer to the user manual to identify the error code. Most issues can be resolved by resetting the machine or addressing the specific issue mentioned in the manual.
It is recommended to clean the water inlet filters every six months to ensure proper water flow and prevent blockages.
Yes, you can wash bulky items, but make sure not to overload the drum. Use the 'Bulky/Large' cycle for best results and balance the load properly.
Regularly clean the drum, door seal, and detergent dispenser. Check for any leaks or unusual noises. Perform a 'Tub Clean' cycle monthly and inspect the hoses for any wear or damage.