LG WKEX200HBA WKEX200HBA.ABLEEUS Installation Manual

Ensure clothes are evenly distributed around the drum, do not overload, and mix large and small items to maintain balance during the wash cycle.
Check if the machine is plugged in, the door is closed properly, and the power button is pressed. Also, ensure the circuit breaker is not tripped.
Remove the dispenser drawer by pulling it out, then rinse it under warm water to remove any detergent residue. Allow it to dry before reinserting.
Ensure the machine is level by adjusting the feet. Check for proper load distribution and avoid washing single heavy items.
Select the Tub Clean cycle on the control panel and add a washing machine cleaner or a cup of bleach, then start the cycle with an empty drum.
Check the drain hose for kinks or clogs, ensure the drain filter is clean, and confirm that the drain pump is functioning correctly.
Leave the door open after each wash to allow the drum to dry, use the Tub Clean cycle monthly, and ensure the rubber gasket is clean.
Regularly clean the filter and detergent drawer, run the Tub Clean cycle monthly, and use the appropriate amount of detergent.
Ensure the load is balanced and not too heavy, check for any error codes, and verify that the lid is closed securely.
Refer to the user manual for error code explanations and follow the recommended steps to resolve the issue. If unresolved, contact LG customer support.