LG WCES6428F WCES6428F.BRSLSTD Installation Manual
![LG WCES6428F WCES6428F.BRSLSTD Oven manual cover](/images/fnvaPNgHPqRXIleMEtxMVhIC/thumbs/thumb175x175.webp)
To preheat the LG WCES6428F oven, press the 'Bake' button, use the arrow keys to set your desired temperature, then press 'Start'. The oven will signal when it reaches the set temperature.
If the oven is not heating, check if it is properly plugged in and the circuit breaker is not tripped. Also, ensure the oven door is fully closed. If the problem persists, contact LG customer support.
To clean the interior, use a non-abrasive cleaner and a soft cloth. Avoid using harsh chemicals. For stubborn stains, use the oven's self-cleaning function by selecting 'Self Clean' and following the on-screen instructions.
Yes, you can use aluminum foil, but avoid covering the entire oven rack as it can block heat circulation. Instead, use it to cover food or line baking trays to catch drips.
Press the 'Timer' button, use the arrow keys to set the desired time, and press 'Start'. The timer will count down and alert you when the time is up.
Regularly clean the oven interior and exterior surfaces. Every few months, check the door seal for damage and inspect heating elements for wear. Annually, have a professional service check for optimal performance.
The fan may continue to run after the oven is turned off to cool down the oven's internal components. This is normal and helps maintain the appliance's longevity.
To use the convection feature, press the 'Conv Bake' or 'Conv Roast' button, set the desired temperature with the arrow keys, and press 'Start'. The fan will circulate hot air for even cooking.
Check for obstructions around the door seal and ensure the racks are properly positioned. If the door still won’t close, inspect the hinges for damage and consult the user manual or contact LG support.
To change the oven light, ensure the oven is turned off and cool. Remove the light cover by turning it counter-clockwise, replace the bulb with a new one of the same type, and reinstall the cover.