LG SRSXB2622S Owner's Manual
![LG SRSXB2622S Refrigerator manual cover](/images/eFEDDmGntTjeEXHKGVRqOJpY/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the '+' and '-' buttons to set the desired temperature for both the refrigerator and freezer compartments.
First, check if the refrigerator is plugged in and the power is on. Ensure that the temperature settings are correct. Clean the condenser coils and check for any blockages in the vents. If the issue persists, contact LG customer support.
It is recommended to clean the condenser coils every 6 months to ensure optimal performance and efficiency.
Store raw meats on the lower shelves, dairy products in the middle, and fruits and vegetables in the crisper drawers. Avoid overpacking the refrigerator to allow proper air circulation.
Locate the water filter compartment, usually inside the refrigerator. Turn the old filter counterclockwise to remove it. Insert the new filter and twist it clockwise until it locks in place. Run water through the new filter for a few minutes before use.
This may be due to a clogged defrost drain. Clean the drain hole using a small brush or warm water to clear any blockages.
Yes, but ensure the garage temperature is within the refrigerator's operating range, typically between 50°F and 110°F, to ensure proper function.
Check if the ice maker is turned on and the water line is connected. Clear any ice blockages and ensure the freezer is set to the correct temperature.
To reset the control panel, unplug the refrigerator for about 5 minutes and then plug it back in. This should reset the system.
Check if the refrigerator is level and ensure it is not in contact with any walls or cabinets. Noises can also be caused by the compressor or fan, which may require professional inspection if the noise persists.