LG P7 P7.DUSAWLK Owner's Manual
![LG P7 P7.DUSAWLK Speaker manual cover](/images/rFFszgzRTxtWdKIZRmZXQrha/thumbs/thumb175x175.webp)
To connect your LG P7 speaker to a Bluetooth device, turn on the speaker and press the Bluetooth button. Ensure your Bluetooth device is in pairing mode and select 'LG P7' from the list of available devices.
If your speaker isn't turning on, check if the battery is charged. Connect it to a power source using the provided charger. If it still doesn't turn on, try resetting the device by holding the power button for 10 seconds.
To reset the LG P7 speaker to factory settings, press and hold both the Power button and the Bluetooth button for about 5 seconds until you hear the reset confirmation tone.
Check if the charging cable and adapter are working properly. Try using a different charger. Also, ensure that the charging port on the speaker is clean and free from debris.
Yes, you can use the LG P7 speaker while it's charging. However, it is recommended to avoid using it at maximum volume to ensure optimal charging efficiency.
The LG P7 speaker provides up to 10 hours of playback time on a full charge, depending on the volume level and type of audio being played.
To update the firmware, download the LG Bluetooth app from your device’s app store, connect your speaker, and follow the in-app instructions to check for and install any available updates.
Ensure that the speaker is within range of the Bluetooth device. Check for any obstructions or interference and try resetting the speaker. Also, verify that the source audio file is of good quality.
The LG P7 supports multi-device pairing. To pair multiple devices, disconnect from the current device and press the Bluetooth button to pair with a new device. Repeat the process as needed.
The LG P7 speaker is not water-resistant. It should be kept away from water and excessive moisture to prevent damage.