LG NanoCell 55NANO75UPA Owner's Manual
![LG NanoCell 55NANO75UPA TV manual cover](/images/qcKjNJuPjiWnRpmvXWueNMKr/thumbs/thumb175x175.webp)
To connect your LG NanoCell 55NANO75UPA to Wi-Fi, go to Settings > Network > Wi-Fi Connection. Select your network from the list and enter the password when prompted.
First, try replacing the batteries. If the issue persists, ensure there are no obstructions between the remote and the TV. You can also try resetting the remote by removing the batteries, pressing each button once, and then reinserting the batteries.
To update the firmware, go to Settings > All Settings > General > About This TV > Check for Updates. If an update is available, follow the on-screen instructions to install it.
Check the picture settings by going to Settings > Picture. Ensure that the Picture Mode is set to your preference. You can also try adjusting the brightness, contrast, and other settings.
To perform a factory reset, go to Settings > All Settings > General > Reset to Initial Settings. Follow the prompts to complete the reset process.
Yes, you can use voice commands with your LG NanoCell TV if it is equipped with LG ThinQ AI. Press the microphone button on your remote and speak your command.
To mount the TV on the wall, use a suitable VESA-compatible wall mount for the TV's size and weight. Follow the instructions provided with the wall mount for installation.
Check if the power cord is securely connected to both the TV and the power outlet. Try a different power outlet if possible. If the issue persists, contact LG customer support.
To enable subtitles, press the Settings button on your remote, go to Accessibility > Subtitle, and toggle the option to On.
You can connect external speakers using the HDMI ARC or optical audio output. Connect the cable to the corresponding port on the TV and the speaker system, then configure the audio settings in the TV menu.