LG LW6014ER LW6014ER.ASWAOSU Owner's Manual
![LG LW6014ER LW6014ER.ASWAOSU Air Conditioner manual cover](/images/PSAyxVPBdSRBeTrttKyxYKQV/thumbs/thumb175x175.webp)
To install the LG LW6014ER, first ensure the window is open and clear. Attach the side curtains to the unit. Place the air conditioner on the windowsill, ensuring it is centered. Close the window securely onto the top of the unit. Extend the side curtains and screw them into the window frame for stability.
Regularly clean or replace the air filter every two weeks during use. Check the condenser coils for dust and debris, and clean them if necessary. Ensure the unit is properly leveled to allow for optimal drainage.
First, check if the air filter is clean. Ensure the thermostat is set to the desired temperature. Verify that the air intake and outlet are not blocked. If the problem persists, check for ice build-up on the coils and defrost if needed.
Check if the unit is securely installed and level. Inspect for any loose parts or obstructions in the fan. Tighten any loose screws or components. If the noise continues, consider contacting a professional technician.
To clean the air filter, turn off the unit and unplug it. Open the front grille and remove the filter. Rinse it under warm running water and allow it to dry completely before reinstalling.
Before storing, clean the unit thoroughly and let it dry completely. Remove and clean the filter. Store the air conditioner in a cool, dry place, preferably covered to prevent dust accumulation.
Use the energy saver mode to reduce power consumption. Ensure the room is well-insulated and use shades or curtains to minimize heat from sunlight. Regularly clean the filter to maintain airflow.
Check if the remote control batteries need replacement. Ensure there are no obstacles between the remote and the unit. Try resetting the remote by removing the batteries and pressing all buttons. Replace the batteries and test again.
To reset the unit, unplug it from the power source. Wait for about 5 minutes, then plug it back in. Turn the unit on and set it to your desired settings.
Turn off the unit and allow it to defrost naturally. Ensure the air filter is clean and the airflow is not obstructed. Avoid using sharp objects to remove ice. Once defrosted, turn the unit back on and monitor for further issues.