LG LW2513ER LW2513ER.AWYAUSH Owner's Manual
![LG LW2513ER LW2513ER.AWYAUSH Air Conditioner manual cover](/images/UGCcsSClxOrdLcssZpBvfcgq/thumbs/thumb175x175.webp)
To install the LG LW2513ER, first ensure the unit is level in the window and securely fasten the mounting brackets. Follow the installation manual for detailed step-by-step guidance, including sealing gaps and checking the electrical connections.
Regular maintenance includes cleaning the filter every two weeks, inspecting the condenser coils, and ensuring the drainage system is clear. It's also important to check for any unusual noises or vibrations.
Ensure the air filter is clean and not blocked. Check that the thermostat is set correctly and the room size is suitable for the unit's capacity. If issues persist, inspect the condenser coils and consult the manual for further troubleshooting steps.
Check if the unit is installed properly and is level. Ensure the drainage system is not blocked and the filter is clean. Excessive humidity could also cause condensation, and using the dehumidification mode might help.
To reset the unit, turn off the air conditioner and unplug it for a few minutes. Plug it back in and turn it on to see if the issue persists. Consult the user manual for any specific reset instructions.
Unusual noises could be due to loose components or debris inside the unit. Check that the unit is installed securely, tighten any loose screws, and ensure there are no obstructions in the fan or vents.
Ensure the room is well-insulated and use curtains to block sunlight. Regularly clean the air filter and ensure the unit is not obstructed by furniture. Using the energy saver mode can also reduce power consumption.
The 'CH' error code typically indicates a problem with the temperature sensor. Check the connections of the sensor and ensure it is not damaged or misplaced. If the issue persists, contact customer support for further assistance.
The LG LW2513ER model does not come with built-in Wi-Fi capabilities for smartphone control. However, you can use a smart plug to gain some remote access functionality.
To clean the air filter, first turn off the unit and unplug it. Remove the front grille and take out the filter. Wash it with warm, soapy water and let it dry completely before reinstalling.