LG LW1513ER LW1513ER.AWYAUSH Owner's Manual
![LG LW1513ER LW1513ER.AWYAUSH Air Conditioner manual cover](/images/JQYCMQrmKngSDfKyirKvgkkR/thumbs/thumb175x175.webp)
To clean the filter, first turn off the air conditioner and unplug it. Open the front grille, remove the filter, and vacuum off any dust. If the filter is heavily soiled, wash it with warm water and mild detergent. Allow it to dry completely before reinstalling.
Ensure that the thermostat is set to the desired temperature and that the air filter is clean. Check if the doors and windows are closed properly. Additionally, make sure that the air conditioner is appropriately sized for the room space.
Check if the unit is properly installed with a slight tilt towards the outside to allow water drainage. Ensure that the drain pipe is not blocked. Clean the filter and inspect the water pan for any obstructions.
To reset the air conditioner, unplug it from the power source for about 5 minutes. Afterward, plug it back in and turn it on. This should reset the system.
The 'CH' error code indicates that the air filter needs cleaning. Remove the filter, clean it, and reset the filter indicator according to the user manual instructions.
Press the 'Timer' button on the remote control. Use the up and down arrows to set the desired time for the air conditioner to turn on or off. Confirm the setting by pressing the 'Set' button.
Unusual noises could be due to loose parts or debris inside the unit. Ensure that the unit is installed securely. If the noise persists, contact a technician for inspection and repair.
It is not recommended to use an extension cord with your air conditioner as it may not provide the necessary power and could pose a safety risk. Use a dedicated wall outlet instead.
Use the mode button on the remote control to switch between modes such as Cool, Fan, and Energy Saver. Each mode provides different functionalities to suit your cooling needs.
Regular maintenance includes cleaning the air filter every two weeks, checking for any blockages in the air intake and exhaust, and ensuring the unit is free of dust and debris. Periodically inspect the unit for any signs of wear or damage.