LG LSXC22396D Owner's Manual
![LG LSXC22396D Refrigerator manual cover](/images/DqYbVflLyGFgKCyMPhSDvJDD/thumbs/thumb175x175.webp)
To change the water filter, locate it in the upper left corner of the refrigerator section. Turn the filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it clicks into place. Run water through the dispenser for 2-3 minutes to flush the system.
Ensure that the refrigerator is plugged in and the circuit breaker is not tripped. Check the temperature settings and make sure the vents are not blocked. Clean the condenser coils if they are dirty. If the problem persists, consider contacting customer support.
Check if the ice maker is turned on and the water line is connected. Make sure the freezer temperature is set between 0°F and 5°F. Inspect the ice maker for any obstructions or ice jams. If necessary, reset the ice maker by turning it off for a few minutes and then back on.
Remove the shelves and drawers from the refrigerator. Wash them with a mixture of warm water and mild detergent. Rinse thoroughly and dry with a clean towel before placing them back into the refrigerator. Avoid using abrasive cleaners or scouring pads.
The LG LSXC22396D is a frost-free model, so manual defrosting is not required. However, if frost buildup occurs, check the door seals and ensure they are sealing properly. If necessary, contact customer service for further assistance.
Press the "Refrigerator" or "Freezer" button on the control panel to cycle through the available temperature settings. Allow 24 hours for the new settings to stabilize. Adjust as necessary based on the refrigerator's performance and ambient conditions.
Check if the refrigerator is level and adjust the leveling legs if necessary. Ensure that the refrigerator is not touching the wall or other surfaces. Normal operational sounds include humming and clicking, but if the noise is excessive, consult the user manual or contact LG support.
Ensure the refrigerator is placed away from heat sources and direct sunlight. Keep the doors closed as much as possible and ensure the seals are tight. Set the temperature to the recommended settings: 37°F for the refrigerator and 0°F for the freezer. Regularly clean the condenser coils to maintain efficient operation.
To reset the control panel, unplug the refrigerator for about 30 seconds and then plug it back in. This can help resolve minor glitches and reset the system. If the issue persists, refer to the troubleshooting section of the user manual or contact LG customer service.
Check the water filter and ensure it is installed correctly. Inspect the water line connections for any leaks. Make sure the defrost drain is not clogged. If the issue continues, it may be necessary to contact a service technician for further diagnosis.