LG LSWD307ST LSWD307ST.BSTLSTD Owner's Manual
![LG LSWD307ST LSWD307ST.BSTLSTD Oven manual cover](/images/IWSDIHXmjRZOYBGUXIZMfsmf/thumbs/thumb175x175.webp)
To preheat the oven, press the 'Bake' button, use the '+' or '-' keys to set the desired temperature, and press 'Start'. The oven will beep when it reaches the set temperature.
Check if the oven is properly plugged in and that the circuit breaker is not tripped. Ensure the oven door is fully closed. If the problem persists, a service technician may need to inspect the heating elements or control board.
Remove all oven racks and any large food debris. Close the oven door and select the 'Self Clean' option. Choose the cleaning time (2, 3, or 4 hours) and press 'Start'. The oven will lock and begin the cleaning cycle.
Press 'Settings', then navigate to 'Oven Calibration' using the arrow keys. Adjust the temperature using the '+' or '-' keys in increments of 5°F. Press 'Start' to save the setting.
Press 'Convection Bake', set the desired temperature using the '+' or '-' keys, and press 'Start'. The convection fan will circulate hot air for even cooking.
Error code F9 typically indicates an oven door lock problem. Check if the door is obstructed or not closing properly. Power cycle the oven by unplugging it for a few minutes, then plug it back in. If the issue persists, contact LG customer support.
Regularly clean the oven interior and exterior with a mild detergent. Inspect and clean the door gasket to ensure a good seal. Check the oven light and replace it if necessary. Perform a self-clean cycle as needed.
Press the 'Timer On/Off' button, use the '+' or '-' keys to set the desired time, and press 'Start'. The oven will beep when the timer reaches zero.
Yes, aluminum foil can be used to line baking sheets or cover dishes, but do not cover the oven racks completely as it can block airflow and affect cooking performance.
Ensure the oven is turned off and cool. Remove the light cover by turning it counterclockwise. Replace the bulb with a new 40-watt appliance bulb and reattach the cover.