LG LSSC243ST Owner's Manual
![LG LSSC243ST Refrigerator manual cover](/images/XaxIcBtPSzYXpMUWOTZmVlEo/thumbs/thumb175x175.webp)
To reset the temperature settings, locate the control panel on the front of your refrigerator. Press the "Freezer" or "Refrigerator" button to cycle through the temperature settings until you've reached your desired temperature. Confirm by pressing the "Set" button.
Unusual noises can be caused by a variety of factors. Check if the refrigerator is level and adjust the leveling legs if necessary. Ensure the refrigerator is not touching the wall or any other objects. If noises persist, inspect the condenser fan and evaporator fan for obstructions or damage.
To replace the water filter, locate it in the upper right corner of the refrigerator compartment. Twist the old filter counterclockwise to remove it. Insert the new filter and twist it clockwise until it is secure. Run water through the new filter for about 2-3 minutes to remove any air or impurities.
If your refrigerator is not cooling, check if the doors are sealing properly and not obstructed. Ensure that the vents inside the fridge are not blocked by food items. Verify that the temperature settings are correctly set. If issues persist, inspect the condenser coils for dirt or dust and clean them if necessary.
It is recommended to clean the condenser coils every 6 months to ensure efficient cooling performance. Use a vacuum cleaner or a brush to remove dust and debris from the coils. Unplug the refrigerator before cleaning to ensure safety.
First, check if the ice maker is turned on. Ensure the water supply line is connected and the water valve is open. Inspect the ice maker for blockages or ice jams. If the problem continues, reset the ice maker using the reset button or consult the user manual for further troubleshooting steps.
To manually defrost the refrigerator, unplug it and remove all food items. Leave the doors open to allow the ice to melt naturally. Place towels around the base to absorb water. Once defrosted, clean and dry the interior, then plug the refrigerator back in.
To optimize cooling, store raw meat and seafood in the coldest part of the refrigerator, usually the bottom shelf. Keep dairy products in the central area, and store fruits and vegetables in the designated crisper drawers. Avoid overcrowding to ensure proper air circulation.
To change the light bulb, unplug the refrigerator first. Locate the light cover inside the fridge, usually at the top. Remove the cover by unscrewing it or releasing the tabs. Replace the bulb with a new one of the same type and wattage. Reattach the cover and plug the refrigerator back in.
Regular maintenance includes cleaning the condenser coils every 6 months, checking and replacing the water filter every 6 months, inspecting door seals for damage, and ensuring proper leveling. Additionally, regularly clean the interior and exterior surfaces to maintain hygiene.