LG LSSB2692ST Owner's Manual
![LG LSSB2692ST Refrigerator manual cover](/images/hzTXJMmxcSkupHRzLbCEqced/thumbs/thumb175x175.webp)
To reset the temperature settings, press the 'Refrigerator' button to adjust the fridge temperature and the 'Freezer' button for the freezer. Hold the respective button until you reach the desired temperature.
Ensure the refrigerator is plugged in and the power outlet is functional. Check if the doors are properly closed and the seals are intact. Additionally, verify the temperature settings and clean any dust from the condenser coils.
It is recommended to clean the condenser coils at least twice a year to ensure optimal performance and energy efficiency.
Water leaking inside the refrigerator can be caused by a blocked defrost drain. Clear the drain by flushing it with warm water and ensure it is free from obstructions.
Locate the water filter compartment within the refrigerator. Turn the filter counterclockwise to remove it, then install the new filter by turning it clockwise until secure. Run water through the dispenser for a few minutes to clear any air and impurities.
Unusual noises could be due to an unlevel refrigerator, items placed too close to the air vents, or the compressor cycling on and off. Ensure the fridge is level and rearrange items to allow proper airflow.
To maximize energy efficiency, ensure the doors are sealed tightly, avoid overloading the refrigerator, set the temperature to the recommended settings, and clean the condenser coils regularly.
Check the water supply line for kinks or blockages. Ensure the ice maker is turned on and the freezer temperature is set correctly. If problems persist, consult the user manual or contact customer support.
It is not recommended to install the refrigerator in a non-climate controlled area as extreme temperatures can affect its performance and longevity.
To perform a factory reset, unplug the refrigerator for about 30 seconds and then plug it back in. This will reset the settings to their default configuration.