LG LSFS213ST Owner's Manual

To reset the water filter indicator, press and hold the 'Filter Reset' button for 3 seconds. The indicator light should turn off, indicating that the reset is complete.
First, check that the refrigerator is plugged in and the power is on. Ensure the temperature settings are correct. Clean the condenser coils if they are dirty. If the problem persists, contact LG customer support for further assistance.
To change the temperature settings, use the control panel located inside the refrigerator. Press the 'Refrigerator' or 'Freezer' button to cycle through the temperature options until you reach the desired setting.
It is recommended to clean the condenser coils every 6 months. Unplug the refrigerator, locate the condenser coils at the back or bottom, and gently clean them with a vacuum cleaner or a coil brush.
Ensure the ice maker is turned on and the water supply line is connected. Check the ice maker's water inlet valve for clogs. If ice is not ejecting, inspect the ejector arm for blockage. Consult the user manual for further troubleshooting steps.
Check if the refrigerator is level and stable. Ensure it is not in contact with any walls or cabinets. Listen to identify if the noise is from the back, possibly due to the compressor or fan motor. Contact a technician if the noise persists.
It is recommended to replace the water filter every 6 months or when the water filter indicator light turns on, whichever comes first. This helps maintain optimal water quality and flow.
Check for obstructions in the door seal and ensure the refrigerator is level. Inspect the door gasket for damage or dirt. Clean with warm, soapy water and replace if necessary. Ensure items inside the fridge do not obstruct door closure.
The LG LSFS213ST refrigerator typically comes with a fixed door swing. Consult the user manual or contact LG support to confirm if a door reversal kit is available for your model.
Ensure the refrigerator is placed away from heat sources and direct sunlight. Keep the appliance well ventilated, and the condenser coils clean. Regularly check the door seals for air leaks and maintain appropriate temperature settings.