LG LP1419IVSM LP1419IVSM.AT1AUSH Owner's Manual

To install the LG LP1419IVSM, ensure that the unit is placed on a level surface near a window. Use the included window installation kit to secure the exhaust hose to the window, ensuring a tight fit to prevent air leaks. Plug the unit into a grounded outlet.
First, check that the power cord is securely plugged into a working outlet. Verify that the circuit breaker has not tripped. If the unit still does not power on, consult the user manual for further troubleshooting steps or contact LG support.
To clean the air filters, turn off and unplug the air conditioner. Remove the filters from the unit and rinse them under lukewarm water. Allow them to dry completely before reinserting them into the air conditioner.
Ensure that all windows and doors are closed to keep the cool air in. Check that the air filter is clean and that the exhaust hose is properly connected and not kinked. Adjust the thermostat settings as needed.
To drain water, locate the drain plug at the back of the unit. Place a container underneath, remove the plug, and allow the water to drain out. Replace the plug securely once draining is complete.
Yes, the LG LP1419IVSM comes with a remote control that allows you to adjust temperature settings, fan speed, and mode selection from a distance.
Before storing, drain any water and clean the air filters. Coil the power cord and secure it with a tie. Store the unit in a cool, dry place. Ensure the exhaust hose and window kit are stored safely with the unit.
To adjust the temperature settings, use the control panel on the unit or the remote control. Press the up or down arrow buttons to set your desired temperature. The display will show the current set temperature.
The LG LP1419IVSM offers several modes: Cool mode lowers the room temperature, Dry mode removes excess moisture from the air, and Fan mode circulates the air without cooling. Select the mode based on your needs.
To increase efficiency, keep curtains or blinds closed during the day to reduce heat gain. Ensure the unit is not obstructed by furniture or other objects. Regularly clean the air filters and ensure the exhaust hose is properly installed.