LG LP0817WSR LP0817WSR.AWYAOSH Owner's Manual

To clean the filter, first turn off the air conditioner and unplug it. Remove the filter from the unit, typically located at the rear or side. Wash it with warm, soapy water and let it dry completely before reinstalling. Regular cleaning is recommended every two weeks during heavy use.
Ensure that the air filter is clean and not obstructed. Check if the exhaust hose is properly installed and not kinked. Make sure the unit is not exposed to direct sunlight and that windows and doors are closed to keep the cool air inside.
Locate the drain plug at the bottom of the unit. Place a shallow pan or suitable container under the drain plug, remove the plug, and allow the water to fully drain. Reattach the plug securely before resuming operation.
Refer to the user manual to identify the specific error code. Common solutions include checking power connections, cleaning filters, or resetting the unit by turning it off and unplugging it for a few minutes.
Position the unit near a window and install the window kit as instructed. Attach the exhaust hose to the back of the unit and extend it to the window kit. Plug in the air conditioner, set your desired temperature, and select the appropriate mode.
Unusual noises may result from a loose part or debris inside the unit. Ensure the unit is on a flat, stable surface. If the noise persists, inspect the unit for obstructions or contact customer support for assistance.
It is not recommended to use an extension cord with the air conditioner due to potential safety hazards. Plug the unit directly into a grounded wall outlet to ensure safe operation.
Regular maintenance includes cleaning the filter every two weeks or as needed, checking the exhaust hose for obstructions, and ensuring the unit is free from dust and debris. Perform these tasks regularly during the cooling season.
Use the energy saver mode to maximize efficiency. This mode automatically adjusts the fan speed and cooling output to maintain your set temperature while reducing energy consumption.
To reset the air conditioner after a power outage, turn it off and unplug it from the power outlet. Wait for a few minutes, then plug it back in and turn it on. Reset your desired settings if necessary.